tracking pixel
Benjamin M

Mancala!

by
benjimerrell13
Follow
Follow
Remix Model
benjimerrell13
benjimerrell13
|
Image 4 of 6
Mancala! 3d model
benjimerrell13
benjimerrell13
|
Image 4 of 6
Mancala! 3d model
2D
3D
Makes
Mancala! 3d model
Mancala! 3d model
Mancala! 3d model
Mancala! 3d model
Mancala! 3d model
Mancala! 3d model

I just learned how to play Mancala, so I designed my own!

This fully functional design will print on a 210 mm x 210 mm bed.

This is a simple board game, and is a ton of fun to mess around with. Here's a super short video by Triple S Games that explains how to play:

https://www.youtube.com/watch?v=OX7rj93m6o8

I wanted to make my own simple version with bright happy colors, and this is what I came up with! If you want to make your own, you should print:

  • 1 Board
  • 2 Covers
  • 48 Pellets

The Pellets are small, so feel free to print a few extra. The covers should fit snugly on the end cups, allowing you to store the pellets there.

There are small holes on the bottom of the game board for 1/2" rubber feet. These should keep the board from sliding around so much while you play. Here's a link to the ones that I used, but any that are 1/2" should be just fine.

https://www.walmart.com/ip/seort/16782103

Enjoy playing!


1 Likes0 DownloadsJune 26, 2024


1 Likes0 DownloadsJune 26, 2024