battery powered, rechargable fume extractor.

I designed around components I already had lying around which might explain some of the questionable choices made in the design and materials.

Don't need a multi material system. The colour changes are just at layers so manual filament swap can be done. I have attached a 3mf with the colour changes. Could possibly be fine tuned.
Suggest printing on something other than textured PEI. I printed on a carbon fiber pattern build plate to get the look in my photos. Would love to see your prints on other build plates and using other materials.
The main 'body' section requires supports on some hidden internal surfaces.    I suggest tree supports on build plate only.

Bill of Materials:
- 60mm 5v fan
- 5050 LED strip (requires a bit of modification to fit, had to remove the rubber and fold the edges back. something around 8mm wide would be ideal)
- [4v(1 cell Lion) to 5v charge/discharge PCB](https://www.aliexpress.com/item/32999118705.html?spm=a2g0o.order_list.order_list_main.340.3f3a1802atvOCF)
( if you use a 12v fan then you will want a 12v version of this but cutouts will be in the wrong places)
- [Female USB C board ](https://www.aliexpress.com/item/1005005241596705.html?spm=a2g0o.order_list.order_list_main.325.3f3a1802atvOCF)
- [ DC step up converter](https://www.aliexpress.com/item/1005005353100234.html?spm=a2g0o.order_list.order_list_main.305.3f3a1802atvOCF)
- 4 x M3 threaded inserts 
- 5 x M3 bolts (one to go into the back of the button once installed so it doesn't fall out.)
- 8 x 6*3mm neodymium magnets 
- 18650 cell 

I will update with more instructions etc later. 
If you have any questions please comment and I will do my best to help! 😊

can modify in OnShape. Document is a bit of a mess 🤷‍♂️
https://cad.onshape.com/documents/54d800c362b420ec4618faf9/w/bf00c6d02e44733d48dd363a/e/613b972fa4a15c57072c451d







Soldering Fume Extractor/Filter, battery powered & rechargable

back plate.stl

a gridfinity module for Marco Bresson's open source cable organiser/winder (small)
Holds 4 spools, holds them standing even when not full
https://www.printables.com/model/601730-parametric-stackable-cable-organizer-winder-one-wa

2x2 squares
6mm x 2mm magnet holes


Gridfinity for Marco Bresson's Cable Organiser / Winder holder

cable spool holderr.stl

Basic chain hook / cleat for 3mm chain. 
Goes without saying this will become the weak link of any chain. 
can customise in OnShape.
https://cad.onshape.com/documents/bfa7bef0664a507739de4186/w/33cb88444cf0de4ded6f60b1/e/b8e48fb009312f7485f51fa6?renderMode=0&uiState=66b1ad88c7678353208db1db


3mm Chain Hook

chain hook.stl

vertical peg board drill bit holder

drill bit holder.stl

vertical pegboard step drill holder

step drill holder.stl

can put coins etc in it as ballast. I smeared some silicone over the magnet surface for grip. could also glue some tpu or something.
Magnets are 6x3.

Cup holder magnetic phone mount

cup phone yee.stl

base.stl

body.stl

button.stl

indicator lens.stl

light.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

baden.t.west

Achievements

Explorer

Seedling

Debutant

Pinned models

Soldering Fume Extractor/Filter, battery powered & rechargable

Soldering Fume Extractor/Filter, battery powered & rechargable

Gridfinity for Marco Bresson's Cable Organiser / Winder holder

3mm Chain Hook

vertical peg board drill bit holder

vertical pegboard step drill holder

Cup holder magnetic phone mount