Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5539724.

removed logo, mirrored cable stay to utilise the "cable chain" type movement where the cable goes to the right then loops left to make smoother cable movement

Ender 3 v2 sprite cable management

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2932407.

PROPS to zMark for his design.

Resized approx. x1.3 to make a little more show worthy, fixed cage for s3d slicing, designed a base to suite a $6 usb touch lamp from KMART with a 105mm round base http://www.kmart.com.au/product/led-touch-lamp-white/1937307 (remove the head and wire in some clear white LEDs)…
Or some copper string lights http://www.kmart.com.au/product/3m-twinkle-lights/765061
poke in 2 lights in each hole and 1 light every 2nd gap around the glow ring and bunch the rest inside the glow cap...

Will probly modify the design to suite particular lights in the future...

Print in your choice of colours or paint and light it up!!!

0.5 nozzle
0.2 layers at 120mm/s (would do it again with 0.1 and a little slower for better detail)
5 top and bottom layers
2 walls
15% rectilinear infill for most (10% grid infill for glowing parts, 20% if you have nice transparent filament)

Stark Industries Mk1 Arc Reactor - Night light with base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5617374.

This Mod was designed with the intent to use as much stock parts as possible of the 2022 tronxy x5sa pro 400 and make it direct drive (without firmware mods)

!!! apart from a 5015 blower if you want (will add a smaller 4010 version if requested)

removes weight of metal hotend shroud 
removes more weight from steel back plates (cutting required to clear the stepper as per photos- elongate holes on back plate if needed)
retains as close as possible level sensor location
prevents hotend fan from cooling the heater (better temps and more stable for petg and abs)

ALSO this mod retains the original cable chain mount height along with an awesome wiring hole....woot woot

i opted for a slim stepper to save another 100g or more

print with supports (from bed only) use ABS for best weight reduction and temp resistance
PETG would be ok aswell but heavier and not so good if printing hot materials alot

Tronxy X5SA PRO 400 Titan Direct Drive

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4279140.

UPDATE... V2 print with 1.8mm shells, no top/bottom/infill... faster and more durable
should be 1.8mm thick... 



Seen a few, combined a few ideas... not the fastest or smallest design but should be comfortable and durable and a very good "multi-fit" even with ponytail

3 shells @ 0.6 line width 

OR FASTER 
with a 0.8 nozzle print at 0.9 line width

1.8mm walls and 0.3 layers... bump up speed, temp and flow to suit but also to make sure the walls join securely... 

ZERO infill/top/bottom needed

please let me know how they go and share around if you like

Respirator Mask Ear saver multi-fit + pony

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2843922.

Was thinking about making the upright hollowed in some way to save filament? please let me know what you think.

Final update (maybe...) - redesigned from scratch with solidworks... now it should print smoother and be a little better looking... added a "non bearing" model aswell...
Print laying flat with the mounting foot piece sticking up...

Print with supports under the bearing shafts (they are floating by a few mm) to eliminate mushroom foot then they should require almost no cleanup...


2020 Spool Holder - Top mount (with or without bearings)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2843916.

Edited with windows 3d builder just for fun...
Turned the main shaft sideways to suit horizontal mounting.
Printed with PETG and was plenty strong enough
0.1 layer height
1mm top/bottom/walls
%25 infill


Horizontal 2020 Spool Holder

Uncover the Aries Correction Collection and resolve standard issues with the Voxelab Aries 3D printer. This user-friendly 3D model collection has been designed for effortless printing, requiring no support structures.

The package features fixes for the poor hotend shroud airflow to both the hotend and the nozzle, and the poorly designed flashforge extruder, enhancing the overall efficacy of your 3D printer. 

Worried about optimal heat management? The collection also includes a robust 3D printer enclosure to maintain the perfect temperature for your PETG and ABS prints.

Moreover, the Aries Correction Collection incorporates mounts for an E3 style mainboard swap, indicated by objects painted blue in the .3mf file. This addition ensures your 3D printer can keep up with the new generation 3D printers unlocking speeds up to 400mms with Klipper firmware and input shaping.

Interact with myself and other 3D printing enthusiasts in the Voxelab Aries Facebook Group.
https://www.facebook.com/groups/918590919525170/

Aries Correction Collection

Aries Correction Collection.3mf

Aries Correction Collection.step

Aries_Correction_Collection-oriented.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

badcreations2017

Achievements

Seedling

Trailblazer