Gridfinity Wall Rack

6K downloads · 4 years ago · Designed to work with storage modules from the Gridfinity system by Zack Freedman. These racks are

This model is restricted by licensing terms.

View license.

Description

Designed to work with storage modules from the Gridfinity system by Zack Freedman.

These racks are stackable, with small tabs to aid in both horizontal and vertical alignment.

I had these windowed divider bins in mind when i was designing this: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Window%2520Divider%2520Bin-60754

Community Makes (1)

Mounted with Self-Locking Slatwall Nut from ArdBoy

Community Makes (1)

Discussions

colombojrj4 years ago

If someone need it, I adapted two 3D models to obtain the 2x4 version. Link here: https://social.thangs.com/m/66086

cannonmccall241 year ago

Hello, I wanted to ask if I can make and sell this design you've made? It would be in small quantities with a small markup, but I love the gridfinity design, your shelves, and the 2v4 shelve design colombojrj remixed. Now that gridfinity has an MIT license, and I have free time, I wanted to get into making and selling useful things people would enjoy. I would give you full credit for the design and a link back, if not that is fine also!

ashleyi1009 months ago

Sorry for slow reply, not active on thangs much.

Go ahead, the models I used to create this are under MIT, and I'll update the license to this model to MIT too. Attribution (in form of a link) is appreciated but not required.

L0Wbster2 years ago

Culd you link the screw compartments from picture 3 ? Can only find closed once.

jruicker7 months ago

https://than.gs/m/60754

This is a windowed bin designed by Zack Freedman. I believe they use microscope slides as windows.

scoutsmercantile3 years ago

Awesome opossum!!

tommyhitchcock3 years ago

What size screws am I supposed to use for this? I went to multiple hardware stores and couldn't find any that fit! I love this design so much that I already printed out 20 of them! Please help.

ashleyi1003 years ago

https://www.diy.com/departments/diall-pz-pan-head-yellow-passivated-steel-wood-screw-dia-3-5mm-l-20mm-pack-of-100/3663602748168_BQ.prd

These are the specific screws I used.

DWola3 years ago

I found M3 screws just fit and M3 washers can be forced into the holes. Although I haven't installed anything yet

punkisfett3 years ago

could you share the model files? the holes for the magnets seem to be too small

toregr4 years ago

Anyone know the distance between the holes? I have a pegboard with 12mm between the holes.

colombojrj4 years ago

Hi. This module is 4x1 size. Please make 4x2!! It would be perfect to store nippers behind the WindowDividerBin. Thanks.

jettstringer34 years ago

What orientation do you recommend to print at? And did you use supports? Thanks!

immensewildwood4 years ago

I printed it on a Prusa mk3 with PLA, with the wall mount facing down. No supports, bridged very well when it came time to do the top of the cup, but YMMV.

View all 12 discussions