Quilted Egg

Quilted Egg Hollow.stl

I thought I could do better than my other knitted egg. I'm happier with this result.

Knitted Egg Better

Knit Egg Better.stl

I wanted an egg that looked like it was knitted, but I have no talent for fiber-craft and some for 3D drawing and printing, so I came up with this.

-There is a hollow version, for decoration.
-A solid version, if you feel the need to bludgeon something I guess. (This is also useful if you want to get rid of filament or print something in glow-in-the-dark.)
-And a split version with a bottom and top so you can hide something in the egg.

Knitted Egg

Knit Egg Hollow.stl

"It does what it says on the packaging."

These tubes hold coins. Each tube holds a roll of coins. 
40 Quarters
50 Dimes
40 Nickels
50 Pennies

I designed the tubes to print in vase mode at 0.3 mm layer height. That lets me print them as fast and cheap as possible.

If you're interested in additional sizes let me know.

Coin Tube

Penny Tube.stl

I used the threads from https://www.printables.com/model/155891-pet-bottle-water-pipe-quick-coupling and drew a vortex connector around them. It works well and seals to the bottle pretty well too.

Vortex Connector (Water Bottle Tornado)

I needed a better way to store my kitchen scissor/shears. So, I drew up this simple hanger. I attached mine to the inside of a cabinet door with command strips.
Each hanger holds 2 scissors.

Kitchen Scissor Hanger

X-Acto Cover

Baby rattle that looks like a sword. 

Throw some pebbles or dry peas or dry beans or dry lentils or smalls screws, I used small screws, in the blade part as it prints. 

Glue the three pieces together and enjoy.

Sword Rattle

Sword Rattle Blade

Simple SD Card Holder

Simple MicroSD Card Holder

The caps to my Rub'n Buff tubes keep breaking so I drew up and printed replacements. 

Rub'n Buff Cap

It's a egg decoration. Maybe an ornament for your Easter tree. 

Mirror Helix Egg

If the case ever arrives that you need to cover the male end of a 2-prong plug here's your model. 
Mine came up through stupidity and poor planning. 

Male North American 2-Prong Plug Cover

Some eye shapes for spooky purposes. Print two of any given eye. I printed some in glow-in-the-dark filament with good results. 

Spooky Eyes

Spooky Eyes 1

This is a replacement person for Little People toys. It should print in place and allow the head to move. 

Little People Person

Door Stop

Wallace and Gromit's rocket from Grand Day Out. 
The model is hollow and prints in pieces so you could store something in it, if you are so inclined. Cheese and crackers perhaps.

The fins are all different so be sure to print one of each.

Wallace and Gromit Rocket

Wallace Rocket Top

Wall mount that holds 4 AA batteries. I use mine to hold rechargeable batteries next to the charger.

AAA Battery Holder

Wall mount that holds 4 AA batteries. I use mine to hold rechargeable batteries next to the charger and to keep extra batteries handy near the flashlight.

AA Battery Holder

Battery dispenser box for AA batteries. Hangs on the wall, dispenses batteries.

AA Battery Dispenser

This holds a 5" round sanding pad, like you use on an orbital sander. Stick velcro backer to the printed piece and you can sand and swap sandpaper.

5 Inch Round Sanding Pad Handtool

5 Inch Sanding Pad.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

archerbaird

Achievements

Seedling

Up and Coming