9 of 30 3D printable lamp designs. It consists of five parts, a “shade” part should be printed in a vase mode (spiral contour in CURA). A “joint” part should be printed with supports. All the other parts are printed normally.

You will need 6 heat inserts (M4 × 5mm height x 6.5mm diameter), 2 M4 × 8mm bolts (or 10mm + a few washers), 2 M4 × 20mm bolts, 2 M4 × 30mm, an e27 plug.

Here is the link to a [EU plug](https://www.amazon.de/-/en/dp/B071KTPL6N/ref=sspa_mw_detail_3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1) and a [UK plug](https://www.amazon.co.uk/dp/B0B97DHR6Z).

Archive includes 5 STL files.

SUNFLOWER

SUNFLOWER_SHADE.stl

8 of 30 3D printable lamp designs. It consists of two parts, top part should be printed in a vase mode (spiral contour in CURA) with TWO bottom layers, VERY IMPORTANT. A base should be printed WITH supports!

Archive includes 2 STL files, a base, and a shade.

TABOURETTE.stl

SHADE_TABOURETTE.stl

7 of 30 3D printable lamp designs. It consists of two parts, top part should be printed in a vase mode (spiral contour in CURA).

Here is the link to a [EU plug](https://www.amazon.de/-/en/dp/B071KTPL6N/ref=sspa_mw_detail_3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1) and a [UK plug](https://www.amazon.co.uk/dp/B0B97DHR6Z).

Archive includes 2 STL files, a base, and a shade.

ORIGAMI_2.0.stl

ORIGAMI_SHADE.stl

6 of 30 3D printable lamp designs. It consists of one part, should be printed in a vase mode (spiral contour in CURA).

Here is the link to a [EU plug](https://www.amazon.de/-/en/dp/B071KTPL6N/ref=sspa_mw_detail_3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1) and a [UK plug](https://www.amazon.co.uk/dp/B0B97DHR6Z).

Archive includes 1 STL file.



ORIGAMI_1.0.stl

ORIGAMI.stl

4 of 30 3D printable lamp designs. It consists of two parts, a base and a shade that can actually be printed in a vase mode, or “spiralize outer contour” in Cura, as well as a normal mode, both will fit in the base.

Here is the link to a [EU plug](https://www.amazon.de/-/en/dp/B071KTPL6N/ref=sspa_mw_detail_3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1) and a [UK plug](https://www.amazon.co.uk/dp/B0B97DHR6Z).

Archive includes 4 STL files, two for bases (wide and standard), two for shades (tall and short).

AMOEBAS

AMOEBAS TALL.stl

3 of 30 3D printable lamp designs. It consists of two parts, a base and a shade that can actually be printed in a vase mode, or “spiralize outer contour” in Cura, as well as a normal mode, both will fit in the base.

Here is the link to a [EU plug](https://www.amazon.de/-/en/dp/B071KTPL6N/ref=sspa_mw_detail_3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1) and a [UK plug](https://www.amazon.co.uk/dp/B0B97DHR6Z).

Archive includes 5 STL files, one for base, four for shades (2 straights, vase and wavy).

SEIGAIHA

BASE 3.stl

2 of 30 3D printable lamp designs. It consists of two parts, a base and a shade that can actually be printed in a vase mode, or “spiralize outer contour” in Cura, as well as a normal mode, both will fit in the base.

Here is the link to a [EU plug](https://www.amazon.de/-/en/dp/B071KTPL6N/ref=sspa_mw_detail_3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1) and a [UK plug](https://www.amazon.co.uk/dp/B0B97DHR6Z).

Archive includes 4 STL files, one for base, three for shades (straight, vase and tapered).

LETTERS

BASE 2.stl

letters straight.stl

3D printable lamp designs. It consists of two parts, a base (94g, printed in a normal mode) and a shade (72g printed in a vase mode, or “spiralize outer contour” in Cura).

Here is the link to a [EU plug](https://www.amazon.de/-/en/dp/B071KTPL6N/ref=sspa_mw_detail_3?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1) and a [UK plug](https://www.amazon.co.uk/dp/B0B97DHR6Z).

Dimensions can be found on the last slide.

Archive includes two STL files only, one for base, one for shade.

CASTLE

SHADE 1.stl

Commercial rights to sell physical 3D prints! Or, unlimited downloads for personal use!

- Unlimited downloads
- All models are thoughtfully designed to print easily
- Save 30% when you choose an Annual Plan
- Files are for commercial use, unlimited sales
- If you don't download any models this month, next month is free

COMMERCIAL

- Save 50% when compared to buying models individually
- Get 3 downloads per month
- All models are thoughtfully designed to print easily
- Save 30% when you choose an Annual Plan
- Files are for personal use
- If you don't download any models this month, next month is free

PERSONAL

BASE 1.stl

ORIGAMI_BASE.stl

⚪⚫🔴 spill some light with our lamps, be cool

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

alimp.design

Achievements

Seedling

Pinned models

CASTLE

ORIGAMI_1.0.stl

ORIGAMI_2.0.stl

SUNFLOWER

TABOURETTE.stl

ORIGAMI_2.0.stl

ORIGAMI_1.0.stl

AMOEBAS

SEIGAIHA

LETTERS

CASTLE