This Pokemon has one of the saddest backstories but also one of the coolest designs so I had to sculpt it ✨

**This model is available _for free_ on MakerWorld (same username), please only purchase here if you wish to support my lil modelling activities.**

This mask was sculpted by myself. If you like it; and even if you don't want one yourself, I would massively appreciate a favourite or giving my little shop a follow. Thank you! 

⭐Features:
- It's a fantastic conversation starter piece for your home
- Provides a cosy habitat for use in vivariums
- Incredible aesthetics 
- Optional version with elastic band attachment spots for a 3-way fit

Cubone Skull Mask for Cosplay, Vivariums or Home Decor (Dual Plate)

Head v4 plate.3mf

A very surrealist mask for an even more surreal artist ✨

This mask was painstakingly sculpted and printed by myself so if you like it; and even if you don't want one yourself, I would really appreciate a favourite or maybe giving my little shop a follow!

⭐Features:
- Large enough eyes to actually see through!
- Elastic band attachment spots on both sides of the mask plus one on the top for a 3-way secure fit.
- Unparalelled aesthetics

📦This mask comes in three pieces:
- The Main body
- The Left ear
- The Right ear
- Note: Print with the face facing upwards, flat on the bed. 

👷‍♀️Assembly:
The main body has spokes on the left and right sides indicating where the ears are to be inserted into and glued into place. Apply some glue to the corresponding holes in the ears and feed the spokes through. Keep it still until sturdy!

Melanie Martinez's Portals Mask 3D Printed Cry Baby Nymph Cosplay Mask

Face_Final.stl

Full plate.3mf

I'm a big fan of the anime (and more so of the manga) so I had to make the mask!

I've updated the model with a variation that adds band attachment points which should help with gluing them on! 

There's also a version that doesn't have any dedicated attachment spots for any bands on as from past experience, it's easier (and significantly comfier) to glue straps to the inside of the masks than it is to mount them to parts kinda poke my face 😅

Recommended settings:
- 0.2mm Layer height
- Printed using PLA but other materials may work as well
- 10% infill density with Cross-Hatch infill pattern
- Generated tree supports (Note: I added support blockers at the top-most part of the mask)
- Highly recommend enabling Outer and Inner Brim.
- Highly recommend increasing the brim width to 5mm since the mask only makes contact with the bed at three points.
- Enabling 'Make Overhangs Printable' works very well. 

I have provided a .3mf file that should contain the necessary print settings.

Dandadan Okarun's Turbo Granny Cosplay Mask

Dandadan Okarun Mask v2.3 (Dual Plate) Generic.3mf

Dandadan v2.3 - With Mask Attachment Points.stl

Dandadan v2.3 - Without Mask Attachment Points.stl

Want to give your 3d printer another project? Take a look at this dagger from the webcomic and anime Solo Leveling! 

This model was 100% made by me and is confirmed to print very well on an entry level 3D printer such as an ender 3. The models have orientated correctly so all you have to do is import them into your slicer and print!

Why order from me?
- If you encounter any issues with the model I'll patch it up and update the model and;
- You'll get access to any any future updates to the model for free. 

This high quality model contains the following STLs:
NOTE: Version 2.2 has been released with some minor fixes
- 1x Dagger Hilt
- 1x Dagger Guard
- 1x Blade tip
- 1x Alignment pegs

There is also space in the model for a 4mm metal rod to stablise the dagger. If you plan on doing this, the alignment peg is not required but the model, when printed, is sturdy enough without a rod in place. 

Recommended settings:
- 0.2mm Layer height
- Printed using PLA but other materials may work as well
- 20% infill density 
- Generated/ Tree supports are *highly* recommended for the overhangs. 

Note for the overhangs: 
Whilst the overhangs do print well with generated supports some may find it better to print at an angle as this may help the overhangs print better.  Please adjust to your system's capabilities. 

License: 
What you can do:
- Create/ Print as many end products for yourself.
- Modify and combine 3D products with other items.

What you can’t do:
- Sell your end product.
- Share or sell 3D products as a stock, template, with source files, as-is or with modifications;
- Using 3D products in "on-demand," "made-to-order," or "build-it-yourself" applications;
- Mark purchased 3D products with your trademark.

End product/ product refers to the digital files and the printed model. 
Basically, please don't take this model and post it elsewhere.

Knight Slayer Dagger from Solo Leveling Cosplay Prop

Full Dagger.stl

Full Dagger Orientated.stl

Blade Tip.stl

Handle.stl

Hilt Base.stl

Peg.stl

Ear_Left_Final.stl

Ear_Right_Final.stl

Just a Welsh 3D Artist who likes to tinker and cosplay! 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

afran3d

Achievements

Seedling

Pinned models

Knight Slayer Dagger from Solo Leveling Cosplay Prop

Dandadan Okarun's Turbo Granny Cosplay Mask

Melanie Martinez's Portals Mask 3D Printed Cry Baby Nymph Cosplay Mask

Cubone Skull Mask for Cosplay, Vivariums or Home Decor (Dual Plate)

Melanie Martinez's Portals Mask 3D Printed Cry Baby Nymph Cosplay Mask

Dandadan Okarun's Turbo Granny Cosplay Mask

Knight Slayer Dagger from Solo Leveling Cosplay Prop