I love making little additions to my Giant LEGO Wreath for each holiday. I really liked this model but wanted to make it slightly easier to print. 

To fit in my 200% wreath I printed this model at 121% scale

If you'd like to see this model in action I posted a video to my YouTube channel which can be found at this link: 

Easter Bunny for Giant LEGO Wreath (Inverted Eyes)

Peep LEGO Wreath Edit.stl

Bau Bau! 

“Not Tommorrow, Toady!!!” - Mococo

I recently watched the debut and opening weeks of the new Hololive English's Generation Advent and really wanted to make the choker the Fuwamoco Twins wear!

This model might seem difficult to print but with specific orientations and brims it should print with minimal or no supports!

 

Main Crystal: This part has what looks like steep overhangs and bridges but printed with a brim with 40 rings I found no need for supports and the model stayed on the build plate. If the model does not stay additional supports can be added but might hinder quality as did in my case. 

 

Chain: This model is meant to be printed at a 45 degree angle! I recommend adding a brim to ensure the model stays on the bed, supports are optional. 

 

Necklace Connector: Please print this piece with no supports to allow for easy addition of the chain. I found that I did not need to stop my printer mid print as the gap between sides was enough to pass a chain link through!

 

P.S. The spikes can be printed or omitted. I normally dislike printing smaller parts because they often break off the bed or look bad but I felt the design lacked something without them!

 

P.P.S. I used a small line of trim I had lying around for the choker band, you could attach it to an actual dog collar if you are doing a full cosplay. 

 

If you want to know more about the design process I will be posting a video to my YouTube channel after all my most recent files are finished. 

Link here: https://youtube.com/@aceganghub

If you have any suggestions please leave a comment or post your make!

 

Fuwamoco Twins: https://www.youtube.com/@FUWAMOCOch

Fuwamoco Twins Choker

Chain.stl

“I smell like glue” - Gawr Gura

Gawr Gura recently debuted her new model and I wanted to model and print something from it! 

The file should be pretty straight forward to print. In order to make it a hairclip you need to purchase clips and glue them on. Here are the ones I bought: https://www.walmart.com/ip/Offray-Accessories-Silver-1-3-4-inch-Small-Metal-Pointed-Hair-Clips-great-for-DIY-hair-bows-6-count-1-Package/938867875?from=/search

I opted to use paint for color because the model is so small, but leave a comment if you'd like to see a fully printed version!

 
If you want to know more about the design process I will be posting a video to my YouTube channel after all my most recent files are finished. 

Link here: https://youtube.com/@aceganghub

If you have any suggestions please leave a comment or post your make!

 

Gawr Gura: https://www.youtube.com/@GawrGura

Gawr Gura Bunny Shark Hair Clip

After seeing the Mario Bros. Movie and buying the new toys, I wanted to give a fun way to display said toys. I made a video showcasing my entire design process, printing, and post processing I did to make this idea a reality. For build instructions please check out the video I made here: https://youtu.be/rplLMDLdMEI

If you're interested in how I designed and built this model please check out the video on my YouTube page! Link: https://youtu.be/rplLMDLdMEI

Super Mario Bros. Movie Figure Stand

Background.stl

I loved my recently published Peep Straw Topper and decided to reuse the design to make something new! This model can be strung through most LED strips to make a free standing Peep Garland.

I modeled this to be print in place without and supports!

If you'd like to see this model in action I posted a video to my YouTube channel which can be found at this link: 

Peep LED Garland

Peep Garland.stl

This model is a simple straw topper made to look like a Peep rabbit candy. I have been printing for recent holidays and was asked to print straw toppers in the shape of Peeps since others had made free standing models that looked cute! 

I modeled this to be print in place without and supports!

If you'd like to see this model in action I posted a video to my YouTube channel which is linked.

Peep Straw Toppers

Peep Straw Cap.stl

Recently I've been watching a lot of Henya streams while I work and was inspired to make a 3D printed version of her cube necklace. 

All files can be printed without supports. I used Inland Silk Gold PLA for the Face Plate Pieces and Inland Natural Clear PLA for the Clear Insert. The Clear Insert has a gap for Infill, I like to use Gyroid infill as I feel it gives all my light up designs a really cool look but this can be changed at your discretion! 

Included with in the description is a copy of my original sketch which has all the Face Plate Pieces labelled by number, but it shouldn't be difficult to print everything and assemble without instruction.

If you want to know more about the design process I have posted a video to my YouTube channel detailing how I made this model! Link: https://youtu.be/7WjQYKzNSo0

If you have any suggestions please leave a comment or post your make!

Henya The Genuis: https://www.twitch.tv/henyathegenius

Henya The Genuis' Cube

Face Plate 1 + 2.stl

“This clock is a magical clock… no, actually a sci-fi clock!” - Amelia Watson

I have been a long time fan of Amelia Watson from Hololive English and wanted to make my own Time Travel clock like hers! 

I specifically designed this model to use a clock mechanism from Michaels Crafts, but I know several options can be found online on places like Amazon for those that do not have a store near them. Clock Link: https://www.michaels.com/product/14-clock-movement-kit-by-make-market-10316294

For the clock face I used the clock face pdf included with download. I included many different sizes for different printer tolerances. I also laminated the clock face before pouring epoxy so the epoxy didn't saturate the paper. The epoxy and lamination are completely optional, I only used them because I had them already!

P.S. I know the clock hands appear too big for the clock face, and I hope to eventually fix this!



If you want to know more about the design process I have posted a video to my YouTube channel. Link: https://youtu.be/7WjQYKzNSo0

If you have any suggestions please leave a comment or post your make! 

Amelia Watson: https://www.youtube.com/@WatsonAmelia

Amelia Watson Time Travel Clock

Main Body.stl

I've been a Gura fan since her debut and wanted to make something to 3D print! 

Please Note: The Tie Clip file is designed to be paused at a certain layer so that you can integrate a standard hair tie into the print itself. I decided to use blue as that's what I had lying around but black would also work. Since hair ties are naturally elastic you can stretch them to take up a smaller space and they fit better into the hole of the file. 

For this particular model I opted to use paint for color because the model is so small, but leave a comment if you'd like to see a fully printed version!


Please check out my YouTube page where I posted a video of the making of the hair tie and maybe even consider subscribing! Link: https://youtu.be/7WjQYKzNSo0

Gawr Gura: https://www.youtube.com/@GawrGura


Gawr Gura Hair Tie

One of my first models was of the VTuber Henya the Genius' Cube and recently she announced a new model. This time I decided to beat my old records for speed of model and release this one before the model debut stream! 

 

The file should be pretty straight forward to print. In order to make it a hairclip you need to purchase clips and glue them on. Here are the ones I bought: https://www.walmart.com/ip/Offray-Accessories-Silver-1-3-4-inch-Small-Metal-Pointed-Hair-Clips-great-for-DIY-hair-bows-6-count-1-Package/938867875?from=/search

I used both Inland White PLA+ and Inland Purple PLA+ with a filament swap to achieve the purple and white mix but you can always paint the final print for the same effect. 

 

Please check out my YouTube page where I have posted videos showing how I've made the other VTuber models I've done in the past. 

Link: https://youtube.com/@aceganghub?feature=shared

If you have any suggestions please leave a comment or post your make!

Henya The Genuis: https://www.twitch.tv/henyathegenius

Henya The Genius' New Outfit Hair Clip

Hairtie.stl

“Houston, we're having an epic battle right now” -Ame

Amelia Watson recently debuted her new Space Inspired Model along with a trip into space. I was inspired by her stream and wanted to model the ship she flies in! 

Main Body- I recommend printing this in either yellow or silver. I printed mine in yellow so I could paint the body and have the small yellow details show up better.

Ignition Cone - Print this in Black. Either side can be printed on the build surface, but the side with the peg for the main body is a larger surface area so requires less supports.

Rocket Fin - Print this in Red. You will need to print this part 4 times.

Rocket Tip - I recommend printing this in either yellow or red. I printed mine in yellow so I could paint it red and have the small yellow details show up better. 

View Port - I recommend printing this in Clear or Natural. If printed with the main viewport up this part requires no supports as the inside is specifically designed to print with no overhangs.

I wired up a quick LED circuit to light up the model after printing! If you would like to see how I did this, I will be posting a video to my YouTube channel after all my most recent files are finished. Link here: https://youtube.com/@aceganghub

If you want to know more about the design process I streamed the making of this particular model here: https://youtube.com/live/ulRk25k8hhE

If you have any suggestions please leave a comment or post your make!

Amelia Watson: https://www.youtube.com/@WatsonAmelia

The Ame Rocket

Recently I was asked to make a better storage system for my mom's re-usable straws. She wanted a bigger box, I said why not think vertically! 

The design is meant for the inside of a cabinet but can be placed anywhere! Included models are a All-In-One Unit which is a little over 300 mm long. Since this is larger than my printer's bed (and most print beds for that matter), I made a split model which uses a simple male and female pin. 

If printed in the orientation the models are set in, there should be no need for supports besides the male and female pins. 

*Please note: This model is designed for a wide variety of plastic straws but sizes may vary!

If you have any suggestions please leave a comment or post your make!

I post about a lot of the models I make and print on my YouTube Channel, Link here: https://youtube.com/@aceganghub

Re-Usable Straw Holder

All-In-One Unit.stl

Tie Clip.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

aceganghub

Achievements

Seedling

Explorer

Debutant

Pinned models

Gawr Gura Hair Tie

Easter Bunny for Giant LEGO Wreath (Inverted Eyes)

Fuwamoco Twins Choker

Gawr Gura Bunny Shark Hair Clip

Super Mario Bros. Movie Figure Stand

Peep LED Garland

Peep Straw Toppers

Henya The Genuis' Cube

Amelia Watson Time Travel Clock

Gawr Gura Hair Tie

Henya The Genius' New Outfit Hair Clip

The Ame Rocket

Re-Usable Straw Holder