Designed a simple over door hook for bathroom towels. Fits over doors <36mm thick.

Printed in PLA+ with 2.4mm walls and 50% infill. Might be overkill but its very sturdy.

Added 2nd version to fit over cubicle walls <80mm thick.

Over-door hook

Designed a simple over door hook for bathroom towels. Fits over doors <36mm thick.

Printed in PLA+ with 2.4mm walls and 50% infill. Might be overkill but its very sturdy.

Cushioned stock attachment for KelTec Sub2000. Many aftermarket pads required drilling holes and running bolts through the stock. Printed in TPU this one slides up from the bottom without any hardware.

Slicer Settings w/.6mm nozzle:
 .2mm layer height, 20 mm/s
1 wall, 20% "3D cross" infill
Print in "upright" orientation with the narrow bottom on the build plate and the fork at the top.

Sub 2000 bumper v2.stl

Cushioned stock attachment for KelTec Sub2000. Many aftermarket pads required drilling holes and running bolts through the stock. Printed in TPU this one slides up from the bottom without any hardware.

Slicer Settings w/.6mm nozzle:
 .2mm layer height, 20 mm/s
1 wall, 20% "3D cross" infill

Sub2K bumper v2.stl

TPU Bumper for the bottom of Yeti bottles. Printed with 1 wall at .6mm and low infill for cushioning. 

Yeti Rambler Boot

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

acampaneria143

Achievements

Seedling

Voyager

Debutant