This model is restricted by licensing terms.
View license.
Cushioned stock attachment for KelTec Sub2000. Many aftermarket pads required drilling holes and running bolts through the stock. Printed in TPU this one slides up from the bottom without any hardware.
Slicer Settings w/.6mm nozzle: .2mm layer height, 20 mm/s 1 wall, 20% "3D cross" infill Print in "upright" orientation with the narrow bottom on the build plate and the fork at the top.
0 Likes20 DownloadsMarch 5, 2023
0 Likes20 DownloadsMarch 5, 2023
This model is restricted by licensing terms.
View license.