Hey, this is an enclosure and stand for a light rod that i made for my brothers drone racing tiny whoop group (BTW, Birmingham Tiny Whoops) as a slalom obstacle. The LED strip is inserted into a length of 20mm oval conduit that you can get from Screwfix or Wickes. the Tri-pod style legs are made from 16mm oval conduit. it is sized and shaped as quadrants to be able to fit inside a poster tube of which the ID is 110mm. the two "IN/OUT" square holes are for RJ45 breakout boards to provide Data and Power to each unit in a daisy chain.(https://www.amazon.co.uk/gp/product/B083C4LYQL/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) Internal height of this print is designed to accommodate a DC DC converter for power (https://www.amazon.co.uk/gp/product/B07H5MC6V3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) Cover is attached to Base with M3 machine screws with heat set brass inserts. hole in a hole in the bottom is for a M6 heat set threaded insert for screwing in a M6 hook. small hole perpendicular to the M6 one is for a wooden skewer for a loop of string or paracord.
Printed with minimal supports 10% infil 4 walls/top/bottom 0.2 layer height 0.4 nozzle