Here're all the Small version of eyes emoji for you to download. To be continued... (note: they only fit onto the models starting from pikachu)

Files:

• Labeled visual guide to help you quickly find and download the eye designs you like.
• Bambu 3MF file (Other slicers can load but might miss some printing setting)
• All STL files

Product:

• Small eye diameter: 31.7mm
• Eyeball and iris don’t have to be just white and black. Try out different colors to see if you can come up with anything fun

Instructions:

• Layer height: 0.20mm is sufficient (you may go down to 0.12mm for the best quality but with significantly more printing time)
• Infill: 5% is sufficient (up to 10% if needed; higher is unnecessary)
• Brim: Add if needed (smaller pieces or if your bed plate often has adhesion issues)
• Any infill patterns work, I usually use Rectilinear or Gyroid
• Wall generator: Arachne
• First layer in 3D printing is very important. Highly recommend to slow down your first layer speed by 50% to avoid printing issue
• Please note that every printer and filament could be different, if any parts are too loose just glue them.

Pick any eyes that you like. If you run into any issues or would like more eye designs, feel free to join my Discord community to let me know

Version v1.1 (updated on 05/16/2026)