Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4851747.
Here is a collection of parts that allow you to use the Nimble Flex on any Creality type print head, as found on a lot of printers, like the CR-10, the Tevo Tornado, and others.
There are two main mount versions. One with nut traps and one with inserts.
The Flex needs a post on the side of the breech, these designs have a separate post. This allows the top surface of the mount to be flat.
Included are 4 different hot end mounts. All hot end mounts use the default hot end cooling fan. The hot end mounts are for the standard Creality hot end (or Microswiss version), the E3D V6, the Mosquito, and the Copperhead hot ends.
There are 3 different part cooling fans included, a 4010 radial fan, as found on the standard printhead, and two units to mount a 5015 radial fan. One for the left-hand side and one for the right-hand side.
Also included is a BL-Touch mount. All the mounts for the fans and the BL Touch are height adjustable.
Finally, I also uploaded basic versions of the hot end mount and the left-hand and right-hand adjustable plates. You can use these to design your own mounts for fans or a specific hot end.
The Step files are also available on Thangs, and there you can see how the whole thing fits together. It allows you to explode the assembly and see what fits where. Have a look here: Thangs
Changelog:
- 1 Initial release.
** The Zesty Nimble V3** The Nimble Flex offers you the most flexibility in mounting, more than any other direct extruder available. It does all that, despite weighing less than any other extruder. Only 27,5 grams! So get a Flex, and enjoy the flexibility and freedom to print on any printer and with any material.
The Nimble is available from Zesty Technology.