The Nimble Flex (V3) extruder can be mounted in many different ways with the drive cable positioned in steps of 22.5 degrees.
These models include each of the positions with correct hole positions and can be used for making mounts. It also includes the space taken up by an open breech so you can ensure you have the required clearances. We even included an upside-down version, in case you wanted to mount it that way.
The Flex can be used right-handed or left-handed, it is ambidextrous. When you do this the bolt positions are flipped on the horizontal plane. To use it in the other orientation, just mirror the file in your CAD environment.
Changelog:
- 1 Initial release.
** The Zesty Nimble V3** These parts are ONLY for the Flex (the Nimble Version 3). With an installed weight of less than 27 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.
The Flex is available from Zesty Technology.