tracking pixel
Zer0s

Tronxy X5SA direct drive with 10x15 cable chain

by
Zer0s
Follow
Follow
Remix Model
Zer0s
Zer0s
|
Image 3 of 3
Tronxy X5SA direct drive with 10x15 cable chain 3d model
Zer0s
Zer0s
|
Image 3 of 3
Tronxy X5SA direct drive with 10x15 cable chain 3d model
2D
3D
Makes
Tronxy X5SA direct drive with 10x15 cable chain 3d model
Tronxy X5SA direct drive with 10x15 cable chain 3d model
Tronxy X5SA direct drive with 10x15 cable chain 3d model
This model is restricted by licensing terms. 

I decided to do a remix instead of updating the earlier design because there are many new parts.

Main focus is changing the mounting holes on the base part and the cable chain bracket on the other end to hold a 10x15mm cable chain instead of the stock 10x10? cable chain. After changing to a direct drive system, I don't think the original cable chain can hold the additional motor cable, and filament sensor without potentially overpacking. And the original cable chain is closed which makes it extremely time-consuming to add/remove cables in the future.

Some other minor changes

  1. Filament sensor bracket mounting hole changed from M4 to M3, since the new cable chain uses M3 holes, it is more to streamline the required threaded inserts.

  2. Narrowed the guide channel on the base to slot into the roller bracket, for tighter fit.

Please refer to https://than.gs/m/878970 for a list of the parts required.

Parts required for cable chain upgrade:

  1. 1pc BMG direct drive 10x15 cable chain and X5SA bracket cable chain 10x15 (both 3D printed)

  2. 1pc 10x15 cable chain

  3. 6pcs Brass threaded insert M3(OD4.5) (length up to 6mm)

  4. 6pcs M3x10 (or longer) countersunk screws

For the revised reverse bowden solution, replace all the M4 screws and threaded inserts with M3 versions.

For the common hardware (fasteners, washers, etc), please refer to my consolidated AliExpress link near the end of this post.


Want to buy me a coffee? https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something within 3 days. (at no extra cost to you)

AliExpress affiliate links:

Cable chain https://s.click.aliexpress.com/e/_DDc3r2V


Consolidated affiliate links of other 3D printing-related items: https://wp.me/peMLu6-j

For Amazon affiliate links https://wp.me/peMLu6-2C


1 Likes2 DownloadsJuly 14, 2023


1 Likes2 DownloadsJuly 14, 2023
This model is restricted by licensing terms.