Zer0s

Spray can straw holder

by
Zer0s
Follow
Follow
Remix Model
Zer0s
Zer0s
|
Image 1 of 2
Spray can straw holder 3d model
Zer0s
Zer0s
|
Image 1 of 2
Spray can straw holder 3d model
2D
3D
Makes
Spray can straw holder 3d model
Spray can straw holder 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5368393.

Update 2 May 2023: Add enlarged straw hole version (+0.2mm diameter). I have not tested printing this, will do so and update if issues are observed.


I chanced upon this https://www.thingiverse.com/thing:5354341 and was impressed with the simple design. I have a few WD-40 and other spray cans with straws, tried it and it works!

I had some initial difficulty inserting the straw into the hole, it eventually went in.

And so I made some design changes to improve the straw insertion.

I had the hole for the straw elongated along a slant surface with a chamfer to guide the straw in easier.

I did it for the 360ml (65.5mm) and 250ml (52.5mm) can sizes.

It seems better to me, hope others feel the same.


Want to buy me a coffee? https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link: https://s.click.aliexpress.com/e/_DeAZr9P


Consolidated affiliate links of other 3D printing-related items: https://wp.me/peMLu6-j

For Amazon affiliate links https://wp.me/peMLu6-2C


34 Likes60 DownloadsMay 22, 2023



34 Likes60 DownloadsMay 22, 2023
This model is restricted by licensing terms.