**FT Mighty Mini Arrow**
PLA or PETG ( is what I use )
**Firewalls** - No Supports - Note different screw mounting spacing is different for different motors. The A Motor and F Motor applies to the motors sold by https://store.flitetest.com/
**Rear Spacer** - No Supports
**Hatch** - Support only under the tab, not needed for the magnet holder ( I don't use a magnet, I simply apply a piece of masking tap to the hatch just before flight )
**Pod** - I print upside down and Do Not use supports for the Nose or other "above the build plate". I do use supports for the rest of the "touching build plate".

**INSPIRATION**
The Pod is a Remix from https://www.thingiverse.com/thing:1972543
The Hatch is from the same
The Rear Spacer is from https://www.thingiverse.com/thing:3033273
The Firewalls are my original

Flite Test FT Mini Arrow Fuselage w Parts 

FT Arrow - V4 Pod - No Back.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5264562.

I did not like the way the provided "Foam Air Intake" fit... so I figured out how to make my own.

Flite Test P-38 Air Intake

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5194782.

FT Guinea Pig Front Wheel
Three times over two years I tried to get the bent wire, for the front wheel, in the FT Build Video to "Track" straight. No Luck.
So... Here we go!  Works Great! ( just no steering on the ground )

Qty 2, 28mm x 12mm (1" x .5") Wheels (might be included in Speed Build Kit) 
2.75mm Rod (might be included in Speed Build Kit) 
Qty 2, 3mm Wheel Collars

Hot Glue in place on the Plane's Nose per the attached images ( same location as the bent wire would be protruding )

Voxelab Aquila ( same as Ender 3 Pro )

PLA
Wall Line Count 3
Resolution 0.2
Infill 90%
Grid Support - Touching Build Plate Only


Front Landing Gear - Flite Test Guinea Pig Front Landing Gear

Flite Test Guinea Pig Front Landing Gear

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ZFamilyRC

Achievements

Seedling

Explorer

Flite Test FT Mini Arrow Fuselage w Parts

Flite Test P-38 Air Intake

Front Landing Gear - Flite Test Guinea Pig Front Landing Gear