This model is restricted by licensing terms.
View license.
Iron Man arc reactor made in Fusion 360 and 3d printed with the Cr-10 and the Anet A8.
Note:
Instruction Image can be downloaded from the link below or feel free to send me a message if you cannot download the image:
https://drive.google.com/file/d/1ofhNepQ4cQyjBvQphI0aFg4_21l6GJz4/view?usp=sharing
Part 10 needs to be printed 10 times.
Part 9 has been updated with hex grid already in place.
LED: Are 5mm ultra bright LEDs.
In order to not use a resistor, the LED's needs to have a forward voltage of 3.6V and be from de same package, otherwise you will need a resistor.
Copper Wire Gauge 18
Screws used: 3 M2x4 and 3 M3x8
Any question please send me an email to:
79 Likes162 DownloadsMarch 30, 2024
79 Likes162 DownloadsMarch 30, 2024
This model is restricted by licensing terms.
View license.