An AI generated pictured by Tech Jeeper for the Westery1 Stream. A Dino wearing a saddle with a bottle of bourbon. Follow the text directions and this should print great. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA POLYMAKER Black Transmission Distance: 0.3 PLA POLYMAKER Gray Transmission Distance: 2.5 PLA COTTEN WHITE Transmission Distance: 3 PLA SOVOL FOREST GREEN Transmission Distance: 6 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #5 (0.56mm) swap to Gray At layer #8 (1.12mm) swap to Gray At layer #20 (1.68mm) swap to White for the rest.