I transfered the Cryptopunk NFT to 3D printable pixels. You have to print every pixel in the "desired" color. For easier printing they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.
E.g.: “Light grey x4_38”
This transfers to:
Color: Light grey Type: 4x connections Number: Print 38 pieces of this connector in the color light grey. There's a PDF you can print out so you have a reference for assembly. It took me around 1,5h to assemble and over 100 hours to print all pixels.
I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)
I also made one which you can see here: https://youtu.be/iS8E_96LbYc