A challenge coin to commemorate the un-graduation of vtuber Mint Fantôme.
Hello to all the wisps in the MemBOOship! I used my Blank Challenge Coin model to make a special coin themed with the colors of Mint Fantôme and some easter eggs. See if you can find them!
The sample here is printed at 0.12 layer height with a 0.4 size nozzle. For better text quality, use a .2 size nozzle. For supports, use snug supports on the back side of the main body.
For the cores, print together and add manual filament swaps at 1.16 and 1.52 layer height (use 0.2 height for first layer). For text rings, add both to the same plate and add a filament swap at 1.16 layer height.
If the parts are too tight, lightly sand the edges and check fitment again. Rim and core just need a very small dab of super glue or adhesive of choice. The adhesive is mostly so the parts don't shift around afterwards. Always use PPE when handling harsh chemicals or strong adhesives.
My base model can be found here: https://than.gs/m/932754?affiliateCode=victorious
Printed here in Protopasta Joel's Highfive Blue, Double Espresso Metallic Brown, Polymaker Silk White, and DO3D Silk Peacock Blue.