Printed in PolyMaker Gold PLA.
This is based off my max height Roe (7 ft) and designed at half size to make it easier to fit smaller printers and show greater detail. For example it should be scaled up to 166% for someone 6 ft tall. To figure out how to scale it ("height in inches"/74)*200.

The the one pictured is printed at the original size. I've printed test models at 50% that show less detail, but still spin if you have a smaller printer :) The inner ring does not move in the one pictured. However, this file has been updated and it should work (I'm 90% sure. I printed out a bunch of test sizes and had different saved models and this one one of the more recent ^^;;).

Anyway, enjoy! 

Final Fantasy 14 Star Globe Weapon 

StarGlobe_Inner_V1.obj

This planter is ~8"  diameter at it's widest. Varying from ~5.75"-~7" at it's top inner edges, and about 2" deep.

The print should be able to be scaled down if it's too big for your buildplate. 

Sliced in Cura, printed on an Anycubic CobraMax with standard settings using Polymaker Marble White PLA. 15% lightning infill. 

No supports. I would recommend ones around the base if you're worried. I had bed adhesion issues that impacted the quality of the print in photos, but it's unnoticeable to if you don't know what you're looking for. Cura recommended supports underneath the upper ridge, but it came out smooooth. In Cura I did slice it to have the very top layer ironed. 

Legs and legholes are a tight squeeze, if your printer isnt dialed in consider scaling the legs down to 97-99%. Or using sandpaper or rubber mallet. I glued them in for extra hold. 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Designed in Fusion 360 using solid modeling and the loft function. I spent waaay too long on this, when it could've been done quickly in Blender. Or maybe Fusion's Surface Modeling functions, but I'm still getting familiar with them. Now that I've seen it printed, I might make some modifications and re-release it down the road, or just take the knowledge with me into future projects :P 

Heavily inspired by this piece: https://www.bonsaivision.com/product-p/bvb47.htm and a similar vintage planter I own. 

Bonsai Pot Antique Mirror Style

bonsai_pot.stl

Printed on AnyCubic KobraMax
Sliced in Cura, I did use the rotate "lay flat" option because I'm lazy. 
Standard settings, 15% lightning infill and no supports. 
(I had a little bit of stringing in the wings and a wonky foot, use supports if you care, but I already knew this would get banged up and it's OLD PLA)
PLA: Old old Pink PLA I've been meaning to get rid of.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I've been pushing myself to learn blender and fusion 360 more, I wanted to try editing and manipulating existing 3D files so I hopped over to model-resources.com and found a bunch of pokedoll references and I geeked out. 

Clefairy Doll Keychain 

My first design I felt confident enough to release. Just some fun little plant coasters for summer! 

Approx 4in/100mm by 0.15in/4mm tall.
Printed on an Anycubic Kobra Max using a 0.4mm nozzle and standard settings. 

PLA's used left to right:
eSUN PLA Pine Green, Pnatone 343C
ZIRO PLA Translucent Green
Solutech PLA Apple Green

MonsteraLeafCoaster.stl

My first design I felt confident enough to release. Just some fun little plant coasters for summer! 
Printed on an Anycubic Kobra Max using a 0.4mm nozzle and standard settings. 

PLA's used left to right:
eSUN PLA Pine Green, Pnatone 343C
ZIRO PLA Translucent Green
Solutech PLA Apple Green

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

UwUstwations

Achievements

Seedling

Debutant

Final Fantasy 14 Star Globe Weapon

Bonsai Pot Antique Mirror Style

Clefairy Doll Keychain

MonsteraLeafCoaster.stl