🔔Multicolor 3MF files are provided for both the normal and keychain versions of this model. 💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher.

🔔Please make sure the raised joint pieces are facing upward, with the rectangular tab securely inserted into the bus body.

🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit isn’t quite right, please adjust the size as needed.

🔔The keychain model is designed to use a 15mm (diameter 0.8mm) ring.

🔔Printing support is not mandatory, but it may enhances the overall quality

🔔Printing in 0.15mm layer height is recommended.

🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.

🔔Add brim or apply glue to the bottom if extra adhesion is needed.

🔔The rendered images are for reference purposes only, and any silver ring shown in the pictures is not included with the model.

❗Please do a test print to ensure quality before starting a mass print.