💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher.

🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit isn’t quite right, please adjust the size as needed.

🔔The keychain model is designed to use a 15mm (diameter 0.8mm) ring.

🔔This model requires keyboard switches to function properly.

🔔Support is required for this model to ensure proper printing, especially for overhangs and detailed areas.

🔔Printing in 0.15mm layer height is recommended.

🔔Recommend the Order of Wall: Outer to Inner

🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.

🔔Add brim or apply glue to the bottom if extra adhesion is needed.

🔔The rendered images are for reference purposes only, and any silver ring shown in the pictures is not included with the model.

❗Please do a test print to ensure quality before starting a mass print.

🙌This model is made available to you by UniQrint paid members.