Table Lamp F013 by UMINO
YOU REQUIRE A MINI LED BULB FOR THIS LAMP REGULAR SIZE BULB WILL NOT FIT EXAMPLE BULB REQUIRED
You require a pendant light cord with threaded rings. Print shade in vase mode. Add bottom shell layers for sturdier shade. Fits E26/E27/E14 If you wish to use E14 print ATTE14.
Assemble shade on top of base. Insert attachment from the bottom of shade. If loose slightly scale down the attachment. If tight slightly scale up the attachment. Same instructions for the bottom cap. Insert pendant light kit from bottom of lamp. The threads from light kit should pop up above the attachment print. Thread the ring from light kit on top to tighten everything together. Insert mini led lightbulb from under the shade.
UMINO© STL files are strictly for personal use. Unauthorized resale of these digital files is illegal and subject to legal action. Respecting this copyright policy not only protects intellectual property but also supports the creators and the integrity of the 3D printing community.
Table Lamp F013 by UMINO
Table Lamp F039 by UMINO
Mini Lamp F038 by UMINO
Pendant Lamp F037 by UMINO
Table Lamp S011 by UMINO
Table Lamp F038 by UMINO
![Table Lamp 006 [ALT] by UMINO 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fenhanced_images%2Fv1%2Ff85a9a13-d75e-491f-819d-00ece03c2f41%2FDSC00435.jpg&w=3840&q=75)
Table Lamp 006 [ALT] by UMINO
Mini Lamp F037 by UMINO
Planter Pot F036 by UMINO
Flower Vase F034 by UMINO
Mini Lamp F036 by UMINO
Storage Container F037 by UMINO
Table Lamp F037 by UMINO
![Table Lamp 011 [ALT] by UMINO 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fenhanced_images%2Fv1%2F1f79d39e-3ef9-4dc3-a253-3f27d00e7f4e%2FDSC00302.jpg&w=3840&q=75)
Table Lamp 011 [ALT] by UMINO
Pendant Lamp F036 by UMINO
Flower Vase F009 by UMINO
Table Lamp F036 by UMINO
Planter Pot F034 by UMINO
Mini Lamp F035 by UMINO
Pendant Lamp F034 by UMINO
Hi,
I printed this lamp but something seems to be going wrong with the walls. In some areas the extrusion becomes uneven and small gaps appear between the lines, especially where the shape starts expanding.
My settings: 0.4 nozzle 0.2 layer height vase mode
Could you let me know if there are recommended settings for printing this model?
Thank you!
Hello! The shade is having problems printing in vase mode? I used pretty default settings with vase mode to print this one.
was it 0.4 nozzle and 0.2 layer? thanks for the reply
Yes I use 0.4 and 0.2 layer height. I used a matte PLA filament for this one.