UMINO1.5K followers

Pendant Lamp F011 by UMINO

Name: Pendant Lamp F011 by UMINO
Brand: UMINO
SKU: 1498966
Price: 6.99 USD
Availability: InStock
Rating: 5 (34 reviews)

89 downloads · 6 months ago · [COMMERCIAL LICENSE](https://than.gs/u/5997795?plans=true) Minimum Print Area Required: 5.91in x 5.9

Subscribe for access starting at $18 USD

Get access to this model and 161+ more

One-time purchase for $6.99 USD

Description

COMMERCIAL LICENSE Minimum Print Area Required: 5.91in x 5.91in x 7.09in. You require a pendant light cord with threaded rings. Fits E26/E27 Use an LED lightbulb. Do not print in vase mode.

UMINO© STL files are strictly for personal use. Unauthorized resale of these digital files is illegal and subject to legal action. Respecting this copyright policy not only protects intellectual property but also supports the creators and the integrity of the 3D printing community.

Tags:

Discussions

julianopolito5 months ago

what are the recommended settings for print?

UMINO5 months ago

I’d recommend your preferred settings to print. There aren’t specific settings required for this model aside from not using vase mode.

julianopolito5 months ago

but usually what is that you use for the shades? layer height, # of walls, infill %, infill type? you probably have tested enough to have a prefered setup. I have just printed nozzle 0.6, 0.36 layer height, 12% infill gyroid, 2 walls. But feels a little heavy, what would be the minimum infill that works well here? Using LED lamp, can I use PLA? feels like yes. thank you

UMINO5 months ago

Yeah with this one you can go more standard as it’s a solid shade instead of a see-through shade. It’s heavier because of that but you can go with lighter infill like 5% on this one. Two walls should work fine. I mainly stick to default settings with less infill as it helps gauge how it will print for others.