This is a handle for the Beyblade x proto launcher pictured above. Couldn't find exactly what I was looking for as a free model so I made it and hopefully it can help some others. It prints in 2 parts and seems to work best in ABS. Tolerances are perfect for my Dremel 3D45 but results may vary. I connected the 2 pieces with cyanoacrylate super glue but you could probably use a solvent like acetone to weld the plastic together. Print the clip on its side like shown in the picture and the handle the way it's oriented by default. I'd recommend around 30% infill and the one in the picture was printed with 0.3mm layer height at 100mm/s print speed. Hope this can help someone looking for something like this, for my hand the grip is comfortable but if anyone wants modifications shoot me a comment and I'll see what I can do!