Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3772642.

<a href="https://github.com/Toylerrr/Flashforge-for-Cura"></a>

<h1>Install Instructions</h1> Easy way: The Github has an installer you can just run and install.

Hard way: Just download the master zip and drop the files into your cura install folder NOT THE APPDATA.The most common install location is C:\Program Files\Ultimaker Cura X.X

<p>Click <a href="https://github.com/Toylerrr/Flashforge-for-Cura/issues">HERE</a> for bug reports</p> <h1> Extra Notes </h1> <h3>Starting Gcode</h3> The Gcode for the <b>start script does not have M104</b> (Set Extruder Temp) so that cura can generate those for you. If the M104 was in the start script then you would have do disable the other extruder like [Egurs profile](https://github.com/eugr/Flashforge-for-Cura) or have whole different profiles for each side like [Lyl3s profile](https://www.thingiverse.com/thing:3569113). So you need to make sure that you have a skirt around your print because this profile does not have any purge nozzle scripts in the starting Gcode. <h3>Gcode Flavor</h3> This is set to reprap for better use with [Octoprint](https://i.imgur.com/DKgeAIC.png).