Fursuit Wall mount hang - drill-less

A hook to mount your fursuit head to the wall! Has enough separation from the wall to ensure (most) fursuit head does not get crushed to the wall. Can also be used to hold other masks/costumes, or coats (maybe). The hook is rounded on all edges to avoid damaging the fursuit

Important! Print settings:

• 0.16mm layer height
• 5 perimeters minimum (to ensure sufficient strength)
• I used 5% infill, feel free to change this to your liking
• Print from the base upwards, an ender 3 should be able to print the 30º slope without supports

Note: this is designed to use drill-free adhesive hooks to avoid damaging walls, useful for renters like myself, the pads I used are like these (check the dimensions!): https://www.amazon.es/Auptiz-Autoadhesivos-Transparentes-adhesivos-impermeable/dp/B0B3J4TMP3/ref=sr_1_40 https://www.amazon.com/Transparent-Reusable-Adhesive-Waterproof-Oilproof/dp/B0919SV15Q/ref=sr_1_26