Fallen Archangel warrior Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA overture black Transmission Distance: 1.1 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA+ Esun Bone Transmission Distance: 7.5 PLA Elegoo Rapid white Transmission Distance:6.5

Swap Instructions: Start with black At layer #7 (0.64mm) swap to Green At layer #14 (1.2mm) swap to Ash Gray At layer #17 (1.44mm) swap to Blue Gray At layer #18 (1.52mm) swap to Bone At layer #23 (1.92mm) swap to White for the rest.