Spooky Swirls: Glow-in-the-Dark Pumpkin! 🎃

Get into the Halloween spirit with my latest 3D printable swirl art! This festive pumpkin design features intricate swirls, spooky spider webs, and is printed using glow-in-the-dark filament to light up your space at night. Perfect for adding a fun, eerie touch to your home decor this season!

Whether you're a fan of pumpkins or just love unique seasonal art, this piece will bring your Halloween setup to life. Download it today and start printing your own glowing masterpiece!

🎨 These are the filaments I've used

• Bambu Lab Basic PLA Black
• Bambu Lab Basic PLA Glow Orange
• Bambu Lab Basic PLA Glow Green
• Bambu Lab Basic PLA Glow Yellow

Print and assembly instructions

Wave Art

• Wall Generator: Arachne
• Infill: 15% on base, 100% on swirl parts
• Outer and inner wall speed = 90 mm/s on swirl parts
• Parts need to be glued onto the base

Frame

• Wall Generator: Arachne (otherwise the chances of the print-in-place latches fusing to the frame are higher)
• Infill: 15%
• To loosen the latches move them up a bit before turning them
• Use the latches to secure the artwork into the frame (TIP: add a strip of tape to the back of the artwork where the latch will hold if the latch is too loose)
• When you use the wall hook, make sure you turn the latch under the hook to the locked position before installing the wall hook. Slide the artwork under the locked latch first, position it into the frame and close all other latches

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.