An evil pumpkin grins amidst ghostly apparitions entwined in spider webs, casting a sinister spell over the haunted scene.
- Plate 1: 3DJake ecoPLA Neon Green
- Plate 2: Tinmorry PLA Glow In The Dark
- Plate 3: Eryone PLA Black
- Plate 4: Prusament PLA Galaxy Purple
The colors are just guidelines, you can get creative with the color scheme for a personal touch.
It consists of 4 plates.
Print settings
Coffin Box
The box has a print-in-place hinge and friction locking mechanism. The door should open easily after printing.
I recommend you print the testprint.stl to check if your printer is tuned to retain dimensional accuracy while printing the box. You'll have to tune your printer if you're unable to open the door of the box.
I've added a screenshot with the recommended orientation for printing the box. In my experience printing the box with the top on the build plate is the recommended way.
- Tree supports (auto generated + on built plate only)
- 15% infill
- Arachne wall generator recommended (helps with dimensional accuracy)
Plates
- No supports
- 100% infill
- Arachne wall generator recommended
- For smooth top finish you could use ironing or print on smooth build plate, face down
ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.