E3D Revo CR Hotend Mod for Creality CR-6 SE

Based on the MBOT3D MK2_Rev2.0 by Ahmad Sunardi, I have designed this E3D Revo CR Hotend Mod for Creality's CR-6 SE. It also adds a dual Blower Fan Duct to the printer.

The magnetic lid allows for easy access to your hotend.

It allows for better part cooling, increased print speed and quality!

Link to Ahmad's original Design: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1

Bill of Materials

• E3D RapidChange Revo CR Hotend - https://geni.us/RevoCR
• E3D RapidChange Revo Brass Nozzles - https://geni.us/RevoNozzle
• M3 Threaded Inserts (6x) - https://geni.us/ThreadedInserts
• M3 Round Head Screws (various lengths) - https://geni.us/M3-Screws
• M2 Round Head Screws & Hex Nuts (4x) - https://geni.us/M2-Screws
• 4010 Radial Fans (2x) - https://geni.us/4010Fan
• 10x2mm Neodym Magnet (1x) - https://geni.us/QEHG
• 8x3mm Neodym Magnet (1x) - https://geni.us/8x3Magnet
• Shrinking Tubes - https://geni.us/ShrinkTubes

Print Settings - Fan Shroud

• Filament: PETG - https://geni.us/PETG
• Print Temp: 245 °C
• Bed Temp 70 °C
• Perimeters: 3
• Infill: 25%
• Support: Paint on supports for selected parts
• Some parts should be turned around for better printability

Print Settings - Other Parts

• Filament: PLA - https://geni.us/FavFilament
• Print Temp: 210 °C
• Bed Temp 60 °C
• Perimeters: 3
• Infill: 25%
• Support: Paint on supports for selected parts
• Some parts should be turned around for better printability

I am printing with a Creality CR-6 SE & Ender 3 V2

Check out my YouTube Video showing the installation process: https://youtu.be/Lnkn1LtQnQw

License Type = CC BY-NC-SA (CC Attribution-NonCommercial-ShareAlike)