Camera Side Handle with Velbon Quick Release

I have developed a Camera Side Handle with a Velbon Quick Release feature, which gives you full flexibility to swap between different cameras.

Bill of Materials

All you need for the assembly of the Side Handle is one M3 hex nut and one 8mm M3 round head screw.

For the camera mounting plates you need either a 1/4 inch round head nut or 1/4 inch hex nut.

Print Settings

The bearing and the Camera Mounting Plate should be turned around before printing.

• Filament: PLA (Prusament)
• Print Temp: 215°C First Layer / 210°C 2nd Layer onward
• Perimeters: 4
• Infill: 25%

I am printing with a Creality CR-6 SE

Check out my YouTube Video for more details: https://youtube.com/shorts/rUpz_rPCNFM

License Type = CC BY-NC-SA (CC Attribution-NonCommercial-ShareAlike)