Better IKEA Markus Desk Chair Armrests

I have designed better low profile armrests for the IKEA Markus Desk Chair.

I recommend using a lot of perimeters to make them as sturdy as possible. If you can, use Carbon Fiber filament. The second best choice is PETG.

To print the armrests your printer needs at least a 220 x 220 mm buildplate.

Print Settings

• Filament: PETG better Carbon Fiber Filament - https://geni.us/FavFilament
• Print Temp: 245 °C
• Bed Temp 70°C
• Perimeters: 6
• Layer Height 0.6 mm
• Supports: Not needed!
• Infill: 33%

I am printing with a Creality CR-6 SE & Ender 3 V2

License Type = CC BY-NC-SA (CC Attribution-NonCommercial-ShareAlike)