Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5530396.

This remix was made because I needed space for a right drawer (or front power button).
Thanx mrmt32 (https://www.thingiverse.com/mrmt32) for the original version!

With this remix I still have room for an optional drawer on the right side. 

For right side optional drawer see: https://www.thingiverse.com/thing:5138213 
or https://www.thingiverse.com/thing:5138213

Printed and fitted on my Ender 3 V2 Neo.

Ender 3 v2 Raspberry pi drawer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5753537.

Remix Info:
=========
Added 2 small notches on the inside so Clip fits tighter around the spool and will click behind the bevelled edge of the spools.
Some spools have bevelled edges inside, and some have it on the outside, this clip will click behind either edge for a better fit. And for spools without bevelled edge this enhanced clip will also be a lot tighter because of the 2 small notches inside so it wont come loose so fast.

Thanks to the original designer for sharing!

Improved Awesome Filament Clips

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5617935.

Extra Axis movement and Leds holder.

For the rest of connectors visit the original at https://www.thingiverse.com/thing:3095730 

The last Arm is remade so it can connect to the extra 90 degrees Joint.
New extra 90 degrees rotated Joint to create extra axis movement.

Print:
Make the parts that hold the bolts strong!!! 
Do not just use infill, but create more external perimeter layers that will make it strong!

Build:
Use this XL ARM to connect to the included 90 degrees Joint.
Use this included Joint to connect XL Arm to Led-Cam holder.
Same M5 bolts/nuts can be used as original design.
I left a opening in the middle for the wiring for the leds to the back of the frame.

Leds:
2812B RGB 5V. Connected to Wemos D1 / Wled > 24-5V regulator > Ender Powersupply.
Challenge was to connect the corners. I used 3 tiny wires and soldered.
But there are 90 Led hook connectors available on Alie if you don't want to solder.
My leds did not have the glue on the back (used leds), so i used hot glue (ugly i know ;))..
D1 board has limited power, so do not attach to many leds directly to the D1 board.

Tip... In Octoprint, Install Wled addon.

Want to know more or need help? Just ask...


Camera Arm with Leds holder and Improved movements

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5550906.

Holder for 3 most used tools.
Easy assembly, just click in place without needing to unscrew anything.

Why this remix?:
I have 3 Tools I always need but I could not find a smal tool holder for all 3 together.
So this remix can hold the Spatula, Wire cutters, and Tweezers.

On my Ender 3 v2 Neo it fits left and right, front and back.

Ender 3 Pro: Watch out for the height! You need extra dampening feet or shorten this holder.

Another Tool Holder for Ender 3 v2 (Neo)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

The Duke Sr

Achievements

Novice Maker

Seedling

Up and Coming

Ender 3 v2 Raspberry pi drawer

Improved Awesome Filament Clips

Camera Arm with Leds holder and Improved movements

Another Tool Holder for Ender 3 v2 (Neo)