tracking pixel
Thangs

Tulip: Napkin Holder by elleSTVDIO

by
Thangs
Follow
Follow
Remix Model
Thangs
Thangs
|
Image 1 of 6
Tulip: Napkin Holder by elleSTVDIO 3d model
Thangs
Thangs
|
Image 1 of 6
Tulip: Napkin Holder by elleSTVDIO 3d model
2D
3D
Makes
Tulip: Napkin Holder by elleSTVDIO 3d model
Tulip: Napkin Holder by elleSTVDIO 3d model
Tulip: Napkin Holder by elleSTVDIO 3d model
Tulip: Napkin Holder by elleSTVDIO 3d model
Tulip: Napkin Holder by elleSTVDIO 3d model
Tulip: Napkin Holder by elleSTVDIO 3d model
*Available in 1 months

This featured model from elleSTVDIO is in Chapter 2 of Thangs Presents! Welcome to 3D Printing and Thangs Presents! Welcome to 3D Printing: Deluxe Edition membership plans.

If you enjoy this model, be sure to check out other models from elleSTVDIO and follow for more amazing content!


Designed by us, 3D printed by you.

This is TULIP, a napkin holder.

Measures:

When close: (L)7 cm x (W)7 cm x (H)7 cm When open: (L)7 cm x (W)7 cm x (H)22 cm

Recommended settings: Make sure to level your buildplate correctly to avoid fusing together the moving parts.

Layer Height: 0.2 Loop Walls: 2 Top Shell: 2 Bottom Shell: 2 Infill: 5% Gyroid


6 Likes2 DownloadsJune 26, 2024


6 Likes2 DownloadsJune 26, 2024
*Available in 1 months