tracking pixel
Thangs

TREFLE | Toothbrush stand by CharlesRegaud

by
Thangs
Follow
Follow
Remix Model
Thangs
Thangs
|
Image 5 of 7
TREFLE | Toothbrush stand by CharlesRegaud 3d model
Thangs
Thangs
|
Image 5 of 7
TREFLE | Toothbrush stand by CharlesRegaud 3d model
2D
3D
Makes
TREFLE | Toothbrush stand by CharlesRegaud 3d model
TREFLE | Toothbrush stand by CharlesRegaud 3d model
TREFLE | Toothbrush stand by CharlesRegaud 3d model
TREFLE | Toothbrush stand by CharlesRegaud 3d model
TREFLE | Toothbrush stand by CharlesRegaud 3d model
TREFLE | Toothbrush stand by CharlesRegaud 3d model
TREFLE | Toothbrush stand by CharlesRegaud 3d model

This featured model from CharlesRegaud is part of the Thangs Presents! Welcome to 3D Printing: Deluxe Edition membership plan.

If you enjoy this model, be sure to check out other models from CharlesRegaud and follow for more amazing content!


TREFLE | Self-draining Toothbrush stand

Self-draining stand to keep your toothbrushes dry and organized.



The bottom of the stand is open to let the water drip and keep the filth away.



And the slots are angled to create some social distancing between the bristly heads.

Happy printing!

DIMENSIONS | W 8 cm x L 8.5cm x H 11 cm

3D PRINT SETTINGS

The stand prints upright without supports. No need for a brim either. The STL file is already oriented properly.

Infill: 10 to 20% Wall line count: 2 Resolution: 0.2 to 0.3mm or less (the stand in the pictures was printed in 0.3mm/layer) Build adhesion type: None Supports: None

The stand was printed with some "fuzzy skin". The settings were:

  • fuzzy skin thickness: 0.15mm
  • fuzzy skin point distance: 0.6mm

13 Likes3 DownloadsMay 30, 2024


13 Likes3 DownloadsMay 30, 2024