Cold Spell, Winter Dragon - Articulated Dragon Snap-Flex Fidget by Mimetics3D

This featured model from Mimetics3D is part of the Thangs Presents! Welcome to 3D Printing and Welcome to 3D Printing: Deluxe Edition membership plans.

If you enjoy this model, be sure to check out other models from Mimetics3D and follow for more amazing content!

Print-In-Place, No Supports, Articulating Fidget Toy Subscribe To the Mimetics 3D Commercial Tier on Thangs for rights to sell prints of your cool new friend.

Within the land of winter's chill, where all the air grows sharp and still, There lurks a dragon, bold and sly, beneath the frosty, starlit sky. All those who glance upon his face, are frozen still right in their place. A sight so fair in frigid night, casts shivers in the moon's soft light.

With breath like wisps of Arctic air, he dances with a graceful flair, Glides gently over snowy plains, and streaks the sky with frosty veins. Caught in his wake, the world transforms; his presence calms the icy storms. All those who witness feel the swell, the charming chill of a Cold Spell!

Snap-Flex Collection: This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Cold Snap to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience.

Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snap-Flex Instructions: To Lock: Push Body Segments together To Unlock: Pull Body Segments Apart

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

Other Models: If you like this Bony Basilisk, be sure to check my other articulated models! Slick the Articulated Snake Long Bony Basilisk Articulated Pearl Dragon

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Print Settings: 0.2mm Layer Height 3 Wall Loops 3 Top Shell Layers Brim Suggested

Suggested Material: PLA or PLA+ IMPORTANT NOTE: Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint. Use silks at your own risk

No Supports, Print-In-Place at 100% scale Printing any smaller may disable the Snap-Flex joint. Printing larger than 100% will make the snap louder AND harder to pop!

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.