**You get:**

- **Access to all** my published designs in this membership at once!
- A **commercial use license**, you are authorized to sell my printed models. Please read the Terms &amp; Conditions.
- **Access to all my product pictures** to use in your own e-commerce store

**Terms &amp; Conditions:**
Sharing or selling any digital files obtained from me is strictly prohibited. Only 3D printed models may be sold. Casted models are also allowed.

TechNerd must be credited as the designer, a short mention is sufficient.

**This license is only valid while subscribed** to a membership that includes a commercial license. If the license is lost, the sale of my printed models must be stopped immediately.

Commercial Gold

**My new set of Aries - demon horns. They turned out amazing!**

These easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming.

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself.

**3MF file is optimised for Bambu Lab printers with included tree-supports and support blocker, ready to print. STL files also included and correctly oriented. **

**Good quality velcro cable tie:**
https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

**3d printing settings:**
-2 Walls
-15% Lightning Infill
-Automatic Tree Supports

**Copyright:**
All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.

**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

Aries Demon Horns

aries_demon_horns_2x.3mf

aries_demon_horns_left.stl

aries_demon_horns_right.stl

These cute RGB light - cat ears easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming. 

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself. The inserts are fixed easily with a drop of superglue. 

I use mini tea RGB lights from amazon. You have to use exactly the ones with the clamp that holds the 2x batteries in place. Other models might not work! The PCB of this tea light is 25mm in diameter and fits inside the cat ear. Happy printing!

**RGB lights:** https://amzn.eu/d/2YRpkri
**Good quality velcro cable tie:** https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

Youtube Video showing the RGB cat ears in action: https://youtu.be/bsbgUmyBiLE

**Check my profile for more designs!**


**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.



**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-2 wall loops
-Top surface pattern concentric
-Sparse infill density 8%
-Sparse infill pattern gyroid
-I made it from basic Black and White PLA
-No supports needed! 
-STL files already correctly aligned!

RGB Light Cat Ears for Headphones

cat_ears_001c_RGB_light.3mf

insert_002c_corner_brims.3mf

cat_ears_001c_RGB_light_v12.stl

insert_001c.stl

insert_002c.stl

threaded_cap_001.stl

Minimalist but cute Halloween diorama. I opted for a combination of black and white PLA with some orange accents for the faces. But feel free to experiment with other colors. Everything is a tight fit - no glue needed. Enjoy!

It looks good both in daylight and in the dark with an electric tea light. Some elements can be placed differently on the plate.

Warmwhite tealights: https://amzn.to/46StMho
Alternatively you can experiment with RGB tealights: https://amzn.to/4dKxGL8
I may earn a commission on qualifying purchases (at no extra cost to you)

You need to press slice in Bambu Studio to see the filament color changes. 3MF file made in Bambu Studio. I used [Bambu Lab Basic PLA](https://shareasale.com/r.cfm?b=2354730&u=4355212&m=138211&urllink=&afftrack=) for the parts but translucent PLA could look great too!

Product pictures for my commercial tier membership free to use in the attachments below.

Cute Halloween Diorama

diorama_001c.3mf

My cute version of a witch's cauldron as a tea light. Can be used with or without the light diffuser and bubbles. Enjoy!

Warmwhite tealights: https://amzn.to/46StMho
Alternatively you can experiment with RGB tealights: https://amzn.to/4dKxGL8
I may earn a commission on qualifying purchases (at no extra cost to you)

3MF files made in Bambu Studio, STL files also included. I used [Bambu Lab Basic PLA](https://shareasale.com/r.cfm?b=2354730&u=4355212&m=138211&urllink=&afftrack=) white for the RGB tea lights and green for the warm white. Translucent PLA could look great too!

**3d printing info - room for improvement:**
No supports needed just hit slice in Bambu Studio and print but the inside bottom part of the cauldron might be "just a little bit" rough because of the steep overhang. I tried tree supports but since the new update (software and firmware) supports always melt together when used in combination with adaptive layer height. No matter what I set as top Z distance. If someone knows how to fix it please let me know!

Also the advanced setting "Order of walls" when set to "inner wall/outer wall/inner wall" creates perfectly smooth and clean outer walls but the inside bottom part is even worse since it's trying to print in mid-air, therefore I had to switch it back to default "inner/outer". It creates okay-ish outer look but the inside bottom part is better this way. I have no solution yet how to get both looking perfect.

**Product pictures for my commercial tier subscribers free to use in the attachments below.**

Cute Witch's Cauldron Tea Light

cauldron_002e.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

TechNerd_official

Achievements

Seedling

Debutant