I was looking for an Elegoo storage box and couldn't find one so i remixed 2 versions of other boxes to get this one. Printed at 100% infill with PETG just for extra strength but you can probably get away with 25%. It was printed on the Centauri Carbon in ludicrous mode. The hinges and handle are on 2.8mm Metal dowel pins and heat pressed into place. The latch i used some strand of PETG for it to lock but would ideally need some longer dowel pins. Logo is glued in place. 3 different bases.

INSPIRATION FROM YANEV https://www.printables.com/model/39729-tool-box-parametric/files AND frikarte3D https://thangs.com/designer/frikarte3D/3d-model/Creality%20Box-904962