With this nozzle extractor assembly, it will make it easier to remove the tapered Swiss3Dc nozzles and avoid damaging the nozzle tip. Only 3 different parts, as two of them need to be printed twice. The hinge (slightly modified, 2mm shorter) should be printed with a 100% infill Printed with a 0.8mm copper nozzle, 0.64mm layer high, 1.2mm layer width would take a little more than an hour... preferably in PetG.
1 Likes9 DownloadsDecember 5, 2021
1 Likes9 DownloadsDecember 5, 2021