This Week's Drop: Vampires 🦇🩸

I wanted each of them to have their own personality.

• The first is a noble vampire, dressed in a long cape, missing one eye, and staring dramatically into the distance with the other.
• The second is much more feral. Hunched over, claws out, looking like he's about to sprint straight for your neck.
• And finally, a classic gothic vampire girl. Elegant, confident, and just a little unsettling. I included two versions: one with a small drop of blood beneath her fangs, and one without.

This drop includes: 3 Vampires + Vampire Girl Alternative

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Key Features

• Easy to print
• Support-free design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Note: Use the feature tree to change the colors. Not the paint tool!

Size & Print Settings: 100% Scale (40mm miniature): 32x26x43 mm

• Recommended nozzle: 0.4mm (standard)
• Recommended layer height: 0.12 mm

75% Scale (28/32mm miniature): 24x20x32 mm

• Recommended nozzle: 0.2mm
• Recommended layer height: ≤ 0.08 mm

Note: I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you know what you’re doing and have a smaller nozzle, you can absolutely scale smaller.

This product is not affiliated with, endorsed, or approved by Wizards of the Coast.