Studio Loup9.7K followers

Stacking Christmas Tree Style 2 3d model

Stacking Christmas Tree Style 2

443 downloads · 8 months ago · **Stacking Christmas Tree Style 2** A modular Christmas tree featuring a geometric exterior texture.

This model is restricted by licensing terms.

View license.

Description

Stacking Christmas Tree Style 2 A modular Christmas tree featuring a geometric exterior texture. Each tier stacks and can also be separated to reveal small hidden storage spaces inside.

Print Settings Each component requires a small amount of support around the base. 15% infill 0.2 Layer Height (Lowering the layer height may increase the surface quality)

Tags:

Community Makes (2)

Printed this with a silk rainbow PLA. I did not use supports on the base piece but I did on the other tiers. Set perimeter at 4. Turned out perfect, no issues. Thanks!

Thank you so much for the beautiful model!
I have seven cats, so a box with a lid is a must-have (especially for Christmas, when you can store small candies in one).

About the downside: this was my first time printing with support, so I ended up with a messy bottom on three of the parts. Printer: Anycubic K1, matte green esun PLA filament.

Community Makes (2)

Discussions

eu.vishneva7 months ago

Thank you so much for the beautiful model! I have seven cats, so a box with a lid is a must-have (especially for Christmas, when you can store small candies in one). About the downside: this was my first time printing with support, so I ended up with a messy bottom on three of the parts. Printer: Anycubic K1, matte green esun PLA filament.

PrinterCreality K1 Max

Print bed sizeX: 300 mm; Y: 300 mm; Z: 300 mm

MaterialPLA

Layer height0.2 mm

Infill density15 %

ChipsNGuac7 months ago

Printed this with a silk rainbow PLA. I did not use supports on the base piece but I did on the other tiers. Set perimeter at 4. Turned out perfect, no issues. Thanks!