Designed as a wall/bedside tablet mountable hook for kid's tablets in a protective foam bumper case. The one pictured is a Samsung Tab A 8.0 in one of the standard foam bumper cases.

Will not need to be scaled up for larger tablets.

Hook dimensioned off internal width of the handle slot as 13.5cm, heigh of the handle slot 2.2cm, overall thickness 2cm and from the top of the handle slot to the top of the tablet being 2.7cm.

Includes small cable wrap section as well.

Can be printed as downloaded, no supports necessary. I printed at 0.16 layer height with 20% infill, gyroid pattern.

Hook for Kids Tablet in Bumper Case

Designed as a wall/bedside tablet mountable hook for kid's tablets in a protective foam bumper case. The one pictured is a Samsung Tab A 8.0 in one of the standard foam bumper cases.

Will not need to be scaled up for larger tablets.

Hook dimensioned off internal width of the handle slot as 13.5cm, heigh of the handle slot 2.2cm, overall thickness 2cm and from the top of the handle slot to the top of the tablet being 2.7cm.

Includes small cable wrap section as well.

This system of mounting templates is designed for the Rack-It Pro 1000kg racking/shelving system from Bunnings Australia.

All of the tolerances and dimensions are based on the physical dimensions and sizes of the Rack-It Pro system, with tolerances set at 3% for FDM printing.

The universal back, single front and double front plate are sized so that they will fit either the upright posts or the accessory hook plate. The key and recess are specifically designed and spaced, so don't change them unless you find they don't fit because of printing tolerances.

The other plates are as described with the Friction Fit not requiring any additional hardware to mount (but weaker) and the Racking Only designed only to fit the uprights due to back and front plate dimensions.

The Universal front plates are sized to be suitable for the locations, and are the templates for you to build your custom tool holders with. I have not included any samples beyond photos as these .step files are a complete redesign from the ground up and I haven't tested them beyond ensuring size and dimensions are accurate.

All fastener sizes are M3, and the fastener heads are designed for either socket head button or socket head cap screws.

In OnShape only the head and captive nut recesses can be suppressed depending on which side you want them on.

In OnShape, all the variables are broken out into specific plate, general as well as fixed (can be edited) variables.

OnShape - https://cad.onshape.com/documents/0780ca0d4de7f75724d6f202/w/b61cc592d1cf0f2397c3e313/e/a23563af83ed70d75501ff8e?renderMode=0&uiState=6330853d169eaa6b36a1824b

For trials I have been printing at 0.2 layer height with 10% infill. Higher infill would be desired for structural purposes. Somewhere around 30%.

Rack-It Pro 1000kg - Customisable tool mounts

Universal Back Plate v1.step

Drills and Drivers Caddy v1.step

Small 3D Printing Tool Caddy v1.step

Universal Back Plate v2.step

Universal Double Front Plate v2.step

Universal Single Front Plate v2.step

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Strixin

Achievements

Seedling

Hook for Kids Tablet in Bumper Case

Rack-It Pro 1000kg - Customisable tool mounts