3D MODEL DESCRIPTION
Darkmoon Greatsword from Elden Ring Ranni's Sword

**This Model is meant for Resin Casting**

Check out my Tiktok StephsNerdyStuff for creation process

I've included the blade to make a silicone mold out of as well as a container for the silicone.

The blade is split into 4 parts. The inside leaves are made of 4 parts. The silicone mold holder is split into 5 parts. The handle is printed whole or in 2 pieces. The wall mount is printed whole.

Step 1: Print and combine all the pieces. Paint the leaves if you want (We are going to set the leaves in the resin).
Step 2: Create a silicone mold out of the blade, using the provided silicone holder and blade.
Step 3: After the mold is cured, remove the printed blade and lightly set the leaves inside the mold. Pour half the Resin blade with half the leaves submerged. Let cure.
Step 4: Demold the half blade. Pour the other half of the blade and set the cured half on top. Let cure.
Step 5: Demold the whole blade. Sand starting with a rough grit and working up to a fine grit. At this point you can either polish or add a clear coat of spray paint. Paint or sand the edges of the blade.
Step 6: Pour resin down the hollow part of the handle and insert the blade. Let cure.

Ink: 24 Oz of Resin per half of blade with
13 Drops Turquoise, 5 Drops Navy Blue, 5 Drops Black

Materials:

PLA
https://www.amazon.com/dp/B0BM7WZPXJ?ref=ppx_yo2ov_dt_b_product_details&th=1

silicone
https://www.amazon.com/dp/B0CH844V9Z?ref=ppx_yo2ov_dt_b_product_details&th=1

Resin
https://www.amazon.com/dp/B0CH9XZNJJ?ref=ppx_yo2ov_dt_b_product_details&th=1

Glow in the dark pigment
https://www.amazon.com/dp/B07W41GC16?ref=ppx_yo2ov_dt_b_product_details&th=1

Alcohol Ink
https://www.amazon.com/gp/product/B085WFSD3W/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

3D PRINTING SETTINGS
Blade can be printed with low infill and walls because it will only be needed to make a silicone mold.

Personal Use Only

My settings
Blade: 15% Infill, 2 Walls, No supports
Silicone holder: 15% Infill, 2 Walls, No supports
Leaves: 15% Infill, 3 Walls, Tree Supports
Wall Mount: 25% Infill, 4 Walls, Tree Supports (Reinforced arms with resin for more strength)
Handle: 25% Infill, 4 Walls, Tree Supports

DARKMOON GREATSWORD FROM ELDEN RING RANNI'S SWORD (FOR RESIN CASTING)

inside3.stl

inside4.stl

Mold1.stl

Mold2.stl

Mold3.stl

Mold4.stl

Mold5.stl

wallmountender3.stl

AllDowels.stl

Blade1.stl

Blade2.stl

Blade3.stl

Blade4.stl

Handle1.stl

Handle2.stl

handleWhole.stl

3D MODEL DESCRIPTION
I hope you enjoy this fan made deku mask from Zelda Majora's Mask!

3D PRINTING SETTINGS
The mask can be printed as one solid piece or in pieces (Head, Leaves, Eye 1 and Eye 2).

Printed as one solid piece:

Layer Height: .15
Infill Density: 15%
Infill Type: Gyroid
Printed with Tree Support with Support Overhand Angle: 75
Width: 210.9 MM
Length: 322.7 MM
Height: 102.8 MM
Print Time: 1 day 22 hours 21 minutes
PLA: 278g

File Type: STL

You can print the eyes separately in yellow PLA and put a light behind them to get the glowing eye effect. To get a nicer fit for the eye, you can warm up the PLA with a blow dryer to get it to bend to the perfect shape for the eye and glue in on behind the mask.

https://www.tiktok.com/@stephsnerdystuff/video/7061816646406769967?is_from_webapp=1&sender_device=pc&web_id7065055736111973893

DEKU MASK FROM ZELDA MAJORA'S MASK

DekuMaskEye1.stl

DekuMaskEye2.stl

DekuMaskFull.stl

DekuMaskFullNoEyes.stl

DekuMaskLeaves.stl

DekuMaskPart.stl

DekuMaskPartNoEyes.stl

3D MODEL DESCRIPTION
I hope you enjoy this Korok mask from Zelda Tears of the Kingdom!

The pinwheel spins.

I've created a version with and without eyes so it can be wearable.

It fits on and ender 3 or larger sized printer.

I've included printable strap adjusters so you can add straps.

3D PRINTING SETTINGS
Tree supports

KOROK MASK FROM THE LEGEND OF ZELDA TEARS OF THE KINGDOM

All Strap Adjusters.stl

Middlestrapadjuster.stl

Pin 2.stl

Pinwheel.stl

Singlestrapadjuster.stl

With Eyes.stl

Without Eyes.stl

3D MODEL DESCRIPTION
Hello! I hope you enjoy this Sword of Night and Flame from Elden Ring!

These files include:
-The whole sword
-The sword sliced into two pieces (for print mills)
-The sword sliced into 8 pieces (for smaller printers like the ender 3)
-Dowels

It's my favorite weapon in Elden Ring! So I had to make one. If you would like to see updates of my sword being printed/painted, feel free to follow me on tiktok and IG @Stephsnerdystuff

3D PRINTING SETTINGS
Printed at 15% infill with tree supports.
Feel free to scale it to whatever size you want. I made mine 40" long

ELDEN RING SWORD OF NIGHT AND FLAME

1back.stl

1front.stl

2back.stl

2front.stl

4front.stl

dowels.stl

largedowel.stl

small dowel.stl

Hey! I'm Steph. I've always loved art and videogame design. I hope you enjoy my sculpts and models!

Check out my Tiktok for tutorials, builds and speed sculpts

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

StephsNerdyStuff

Achievements

Sapling