DARKMOON GREATSWORD FROM ELDEN RING RANNI'S SWORD (FOR RESIN CASTING)

3D MODEL DESCRIPTION Darkmoon Greatsword from Elden Ring Ranni's Sword

This Model is meant for Resin Casting

Check out my Tiktok StephsNerdyStuff for creation process

I've included the blade to make a silicone mold out of as well as a container for the silicone.

The blade is split into 4 parts. The inside leaves are made of 4 parts. The silicone mold holder is split into 5 parts. The handle is printed whole or in 2 pieces. The wall mount is printed whole.

Step 1: Print and combine all the pieces. Paint the leaves if you want (We are going to set the leaves in the resin). Step 2: Create a silicone mold out of the blade, using the provided silicone holder and blade. Step 3: After the mold is cured, remove the printed blade and lightly set the leaves inside the mold. Pour half the Resin blade with half the leaves submerged. Let cure. Step 4: Demold the half blade. Pour the other half of the blade and set the cured half on top. Let cure. Step 5: Demold the whole blade. Sand starting with a rough grit and working up to a fine grit. At this point you can either polish or add a clear coat of spray paint. Paint or sand the edges of the blade. Step 6: Pour resin down the hollow part of the handle and insert the blade. Let cure.

Ink: 24 Oz of Resin per half of blade with 13 Drops Turquoise, 5 Drops Navy Blue, 5 Drops Black

Materials:

PLA https://www.amazon.com/dp/B0BM7WZPXJ?ref=ppx_yo2ov_dt_b_product_details&th=1

silicone https://www.amazon.com/dp/B0CH844V9Z?ref=ppx_yo2ov_dt_b_product_details&th=1

Resin https://www.amazon.com/dp/B0CH9XZNJJ?ref=ppx_yo2ov_dt_b_product_details&th=1

Glow in the dark pigment https://www.amazon.com/dp/B07W41GC16?ref=ppx_yo2ov_dt_b_product_details&th=1

Alcohol Ink https://www.amazon.com/gp/product/B085WFSD3W/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

3D PRINTING SETTINGS Blade can be printed with low infill and walls because it will only be needed to make a silicone mold.

Personal Use Only

My settings Blade: 15% Infill, 2 Walls, No supports Silicone holder: 15% Infill, 2 Walls, No supports Leaves: 15% Infill, 3 Walls, Tree Supports Wall Mount: 25% Infill, 4 Walls, Tree Supports (Reinforced arms with resin for more strength) Handle: 25% Infill, 4 Walls, Tree Supports