This Linn Tonearm Alignment Tool is designed to the exact manufacturer specifications of the original metal Kinky Arm Alignment Tool. Save money, shipping fees, and time with this version of the essential tool. It’s lightweight, easy to use, and the softer plastic has no risk of scratching your platter or plinth.

Designed to work with Linn Sondek LP12 turntables; I can’t guarantee compatibility with any other models or brands.

**Compatible tonearms:**
- Any tonearm that uses the Linn collar
- Linn Ekos Super Evolution
- Linn Arko
- Linn Krane
- Linn Ittok
- Linn Basik

3D print this ready-to-go STL file in your color and material of choice; I use PLA. Print with the collar shaft vertical and extending upward, and the arm against the build plate. Supports not necessary. Brim of at least 5mm required, otherwise the collar shaft will lift off the print bed and affect dimensional accuracy.

For usage and instructions, [check Page 51 of the Linn LP-12 Setup Manual](https://www.manualslib.com/manual/797745/Linn-Lp12.html?page=51).

Licensed for personal use only. [Commercial license available here](https://shop.stephaniecervi.design/products/linn-tonearm-collar-alignment-tool-commercial-license). Please do not redistribute this file in any way, or sell your own prints made from this file. Thank you.

Linn Tonearm Collar Alignment Tool

Linn Kinky spindle tool v3.STL

This 3D-printable mason jar lid rack STL bundle is an organizer’s dream. It’s a simple solution to tame an unwieldy mess of mason jar lids and is designed to fit regular or wide-mouth lids.

The compact, intentional design takes up about the same amount of space as a 16oz regular-mouth mason jar. It accepts both lid-and-ring and single-piece lids, with space built in to allow airflow that keeps lids clean and dry between uses.

Fits regular- and wide-mouth lids, both the two-piece metal lids and the taller Ball brand storage lids. This downloadable bundle includes both files. The majority of standard-size mason jar lids will fit in the lid rack without any trouble.

The lid racks are just over 5 3/4″ / 147mm tall.

3D print these ready-to-go mason jar lid rack STL files in your color and material of choice; I use PLA. If you print them back-down, you won't need to use a raft or supports. Brim recommended if you have adhesion issues.

Licensed for personal use only. [Commercial license available here](https://shop.stephaniecervi.design/products/mason-jar-6-lid-rack-organizer-commercial-license). Please do not redistribute this file in any way, or sell your own prints made from this file. Thank you.

Mason Jar Lid Rack

Mason jar lid rack wide v3.STL

Display tatting, holiday ornaments, decorative eggs, hanging pet memorials, and other small artwork without distracting from the item displayed.

Sturdy, lightweight, and easy to store and assemble, these stands are made up of a base and a curved arm. The hook has a small curl on the end to hold any strings or hangers securely, and the stand is strong enough to hold up lightweight artwork (less than 1lb/0.5kg) without trouble.

**Technical details:**

- From table surface to hook is 6″/15cm or just under 9″/23cm
- Print flat for layers along the length of the arm for extra strength; arm will not separate or snap at a layer join
- Stores flat for easy transport to and from art shows; removable base can be fixed in place with superglue
- Bundle includes 6″ and 9″ uprights, and curly and straight bases for both sizes.

**Tatting patterns featured:**

- Interwoven Picot Medallion designed by Cajah Reed
- Pansy in purples: from Priscilla Tatting book No. 2
- Small blue snowflake: Star in 2 Colors designed by Inga Madsen
- Inverted Snowflake designed by Martha Ess
- Ice Drop designed by Diane Cadematori

**Printing recommendations:**

If you print it with both pieces flat against the print bed, you won’t need to use a raft, brim, or supports. Supports may be necessary if your printer doesn’t do bridges well, inside the slot in the base piece.

Tatting & Ornament Stand - Lightweight, Stores Flat

Tatting stand 6in upright.STL

A simple solution to the clutter of drinkware lids, this 3D printed lid rack is an organizer’s dream. The compact, intentional design has space built in to allow airflow that keeps lids clean and dry between uses.

Available to fit standard YETI® Rambler® and Stronghold™ lid sizes.

Rambler lid racks hold 6 lids; Stronghold lid racks hold 4 lids.

Printed in high quality, eco-friendly, industrially compostable PLA plastic.

Rambler Small rack fits lids from:
- 10oz YETI Rambler wine tumblers
- 10oz YETI Rambler narrow tumblers
- Other lids up to 3.1" diameter and 0.9" thick (79mm x 24mm)

Rambler Medium rack fits lids from:
- 10oz YETI Rambler Lowball tumblers
- 10oz YETI Rambler mugs
- 16oz YETI Rambler pints
- 20oz YETI Rambler tumblers
- 24oz YETI Rambler mugs
- Other lids up to 3.8" diameter and 0.9" thick (96mm x 24mm)

Rambler large rack fits lids from:
- 14oz YETI Rambler mugs
- 26oz YETI Rambler cups
- 30oz YETI Rambler tumblers
- Other lids up to 4.25" diameter and 0.9" thick (107mm x 25mm)

Stronghold 20oz rack fits:
- 20oz YETI Rambler with Stronghold lid
- Other lids up to 3.8" diameter and 1.5" thick (96mm x 40mm)

Stronghold 30oz rack fits:
- 30oz YETI Rambler with Stronghold lid
- Other lids up to 4.25" diameter and 1.5" thick (107mm x 40mm)

I can't guarantee these lid racks will fit other brands of lids. Any lid compatible with YETI products should fit without issue, but please message me with exact dimensions to confirm. If you are unsure which size to order, send me a message with your lid’s dimensions, and I can recommend which size will work best for you.

The lid racks are roughly 7.25" (185mm) tall for Stronghold lids, and roughly 7" (180mm) tall for Rambler lids. Exact dimensions vary slightly depending on the size of the lid.

If you want to place the racks horizontally in a drawer, make sure your drawer will fit them:
- Rambler Small: 3.75" depth
- Rambler Medium: 4.25" depth
- Rambler Large: 5" depth
- Stronghold 20oz: 4.5" depth
- Stronghold 30oz: 5.5" depth


If you like my work and want to support me, please [check out my online store](https://stephaniecervi.design/shop/), [become a patron](https://www.patreon.com/stephaniecervidesign), or [buy me a coffee](https://ko-fi.com/stephaniecervidesign). Thank you!

This model is licensed under a non-commercial license. You may not sell prints of it, or redistribute the original file in any way.

YETI, Rambler, and Stronghold are the property of Yeti Coolers, LLC. I have no affiliation with Yeti Coolers, LLC.

YETI drinkware lid racks

Yeti Rambler medium v2.STL

These modular display plaques are based on the official hexagon honeycomb setup offered by [The Conqueror Challenge](https://www.theconqueror.events/) and [Pacer Virtual Challenges](https://adventure.mypacer.com/) to display your virtual distance challenge medals. Whether you’ve just completed a marathon or are working through virtual races at your own pace, show off your hard-earned medals in style with these easy to hang, single-piece plaques. The honeycomb shape lines up easily with plaques you’ve already hung on your wall for a modular, expand-as-you-go brag board.

3D print these ready-to-go STL files in your color and material of choice; I use black PLA. If you print it face-down, you won’t need to use a raft, brim, or supports.

The single-piece construction means no magnets, no clasps, no tape, and no fiddly threads to align; it just plain works. They’re designed to work with 3M Command Picture Hanging Strips (the velcro-like ones), cut in half or cut down to fit.

Sized for 3″ to 7″ medals (Conqueror Challenge and Pacer are most comfortable on 4″ plaques). Files are available individually. To determine the size of your medals, measure them from where the ribbon attaches to the medal to the bottom-most part of it. Please note that different size plaques will not form an even honeycomb grid, and will not mix and match easily.

There are multiple ways to weave the medal ribbons through the slots depending on the length and how you want to display them. My recommended method can be seen in the product photos on this page.

NEW with v2 files:

- notch at top for hanging on a nail or picture hook
- better design to improve printing without a raft or brim
- all sizes included in ZIP file


If you like my work and want to support me, please [check out my online store](https://shop.stephaniecervi.design), [become a patron](https://www.patreon.com/stephaniecervidesign), or [buy me a coffee](https://ko-fi.com/stephaniecervidesign). Thank you!

Licensed for personal use only. [Commercial licenses available here](https://shop.stephaniecervi.design/products/sport-medal-honeycomb-display-plaque-commercial-license). Please do not redistribute this file in any way, or sell your own prints made from this file. Thank you.

Sport Medal Honeycomb Display Plaque

Medal display 4 inch v2.STL

Get access to my premium library of STL models with unlimited downloads.

Insider

I’m a graphic and web designer that dabbles in product development. I love designing things to solve problems, especially in accessibility.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

StephanieCerviDesign

Achievements

Seedling

Linn Tonearm Collar Alignment Tool

Mason Jar Lid Rack

Tatting & Ornament Stand - Lightweight, Stores Flat

YETI drinkware lid racks

Sport Medal Honeycomb Display Plaque