I invite you to join my Telegram group (Entries are limited - don't miss this opportunity): https://t.me/+cu1hYjl2iT9iZjI0

Thank you for visiting my page! If you can, please consider supporting my art with a subscription. Members will unlock ALL of my designs as well as the commercial rights to sell physical prints for as long as they are members.

_I also invite you to join my Discord channel, whether you're a reseller or a fan. You'll find a dedicated space where you can communicate directly with me and other members: https://discord.gg/pUW67mEFrb

fully 3d printable - no glue needed - no extra part

The white transmission component between the hands and the transmitter must be printed in TPU and fully inserted into the transmitter using a pin approximately 2 mm in diameter (e.g., a small screwdriver). Loosen the hands well on the connection pins to ensure smooth movement — allow for play and friction in the phase immediately following assembly.

REMEMBER THAT ALL MY FILES ARE PROTECTED BY A CC LICENSE AND ARE NOT INTENDED FOR COMMERCIAL PURPOSES UNLESS YOU HAVE SUBSCRIBED TO A MEMBERSHIP PLAN ON THANGS - IF YOU USE MY 3D FILES FOR COMMERCIAL PURPOSES, YOU HARM MY WORK AND MY COLLABORATORS - DON'T DO IT!

Warning: The content in question is protected by a Creative Commons license that does not allow the creation of derivative works or remixes. This means that it is not permitted to modify, transform, or further develop the material in any form. Make sure to comply with the terms of the license to avoid copyright violations.

How do I take such high-quality photographs? Here's my equipment:

Camera: https://amzn.to/3RPDj2c Lightbox: https://amzn.to/4btNvV0 Tripod: https://amzn.to/3L51fuT