I have another bonus release! A Butter Clicker inspired by squishy butter!

WHAT'S INCLUDED

• Butter Clicker STL and 3MF
• Small Butter Clicker
• Large Butter Clicker

RECOMMENDED PRINT SETTINGS

• Layer Height: 0.16
• Infill: 15 percent
• Filament: Matte or regular PLA
• Adaptive Layers recommended for smoother effect
• These are clickers and should not be resized

CLICKER NOTES

• Missing the clicker plus attachment piece? It likely did not adhere to the build plate. Try washing your plate with soap and water, increasing bed temperature slightly, adding a brim, and reprinting the affected piece.

• If your clicker feels wobbly, make sure it is fully seated. You can bend the metal pins inward slightly, or remove them entirely if needed.

• If the top piece feels loose, avoid using Arachne wall generation, as it can affect tolerances. Use Classic instead. Different filaments may also fit differently. Increasing flow slightly can help tighten the fit.

• Make sure all support and brim material are fully removed before assembly.

• Clickers should fit snugly. If parts are unusually loose or tight, minor printer calibration adjustments may be needed. You can also adjust the scale by 0.1 percent if necessary.

OTHER NOTES

• My designs are not recommended for young children or anyone at risk of choking hazards, as some parts may be small. They are also not food safe, as always with 3D prints.

• I make all of my designs from scratch in Blender without the use of AI. I will be recording my process more this summer if I have the time and making more videos. You can check my channel out here: https://www.youtube.com/@StarMouse3D

Hi there! I am Mouse and I love art and 3D printing. I am inspired by cottagecore, fantasy, and kawaii things. Thank you for taking the time to read this.

If you like this design, please check out my other models: cults3d.com/en/users/StarMouse3D/creations

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me.

To legally obtain permission to sell physical prints, you may obtain permission to sell every model as an active Patreon supporter through this link: patreon.com/c/StarMouse3D

Please do not share digital files. Thank you.

Please be warned that these models are not toys and are not recommended for young children or anyone at risk of a choking hazard. Small parts may break if handled roughly. Print at your own risk.

I make all of my designs from scratch in Blender without the use of AI.